Деталі продукту див. у специфікаціях.
S-8252AAW-M6T1U
Product Overview
Category
S-8252AAW-M6T1U belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used for battery protection in various electronic devices.
Characteristics
- The S-8252AAW-M6T1U offers reliable and efficient battery protection.
- It provides overcharge, over-discharge, and short-circuit protection.
- The IC has a low power consumption mode to conserve energy.
- It supports a wide range of battery types, including lithium-ion and lithium-polymer batteries.
Package
The S-8252AAW-M6T1U comes in a compact and durable package, ensuring easy integration into electronic devices.
Essence
The essence of this product lies in its ability to safeguard batteries from potential damage caused by overcharging, over-discharging, or short-circuiting.
Packaging/Quantity
The S-8252AAW-M6T1U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Overcharge Detection Voltage: 4.25V ± 0.05V
- Overdischarge Detection Voltage: 2.5V ± 0.1V
- Overcurrent Detection Voltage: 0.15V ± 0.02V
- Operating Temperature Range: -40°C to +85°C
- Standby Current: 0.1µA (typical)
Detailed Pin Configuration
The S-8252AAW-M6T1U features the following pin configuration:
- VDD: Power supply input
- GND: Ground reference
- BAT: Battery connection terminal
- CHG: Charging status output
- DSG: Discharging status output
Functional Features
- Overcharge protection: Prevents the battery from being overcharged, ensuring its longevity.
- Overdischarge protection: Safeguards the battery by preventing it from being discharged beyond safe levels.
- Short-circuit protection: Detects and protects against short circuits, preventing damage to the battery and the device.
- Low power consumption mode: Reduces power consumption when the IC is not actively protecting the battery.
Advantages and Disadvantages
Advantages
- Reliable battery protection
- Wide range of supported battery types
- Compact and durable package
- Efficient power management
Disadvantages
- Limited operating temperature range (-40°C to +85°C)
- Standby current may vary depending on specific conditions
Working Principles
The S-8252AAW-M6T1U monitors the voltage levels of the connected battery. It compares these levels with predefined thresholds to detect overcharge, overdischarge, and short-circuit conditions. When any of these conditions are detected, the IC takes appropriate actions to protect the battery and the device.
Detailed Application Field Plans
The S-8252AAW-M6T1U finds applications in various electronic devices that utilize rechargeable batteries, such as: - Mobile phones - Tablets - Laptops - Portable gaming devices - Power banks
Detailed and Complete Alternative Models
- S-8252ABW-M6T1U
- S-8252ACW-M6T1U
- S-8252ADW-M6T1U
- S-8252AEW-M6T1U
These alternative models offer similar functionality and features, providing flexibility for different design requirements.
In conclusion, the S-8252AAW-M6T1U is a reliable integrated circuit used for battery protection in various electronic devices. Its features, such as overcharge and overdischarge protection, make it an essential component for ensuring the longevity and safety of rechargeable batteries. With its compact package and wide range of supported battery types, this IC offers efficient power management and is widely applicable in the consumer electronics industry.
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням S-8252AAW-M6T1U у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of S-8252AAW-M6T1U in technical solutions:
Q1: What is the S-8252AAW-M6T1U? A1: The S-8252AAW-M6T1U is a specific model of a battery protection IC (Integrated Circuit) used for protecting lithium-ion rechargeable batteries.
Q2: What is the purpose of using the S-8252AAW-M6T1U in technical solutions? A2: The S-8252AAW-M6T1U is used to prevent overcharging, over-discharging, and overcurrent conditions in lithium-ion batteries, ensuring their safe and efficient operation.
Q3: How does the S-8252AAW-M6T1U protect batteries from overcharging? A3: The S-8252AAW-M6T1U monitors the battery voltage and disconnects the charging circuit when it reaches a predefined threshold, preventing overcharging.
Q4: Can the S-8252AAW-M6T1U protect batteries from over-discharging? A4: Yes, the S-8252AAW-M6T1U also monitors the battery voltage during discharge and disconnects the load when it reaches a certain low voltage level, preventing over-discharging.
Q5: Does the S-8252AAW-M6T1U provide protection against overcurrent situations? A5: Absolutely, the S-8252AAW-M6T1U has built-in overcurrent detection and can quickly disconnect the battery from the load when excessive current is detected.
Q6: What is the maximum voltage rating supported by the S-8252AAW-M6T1U? A6: The S-8252AAW-M6T1U can handle a maximum voltage of 18V, making it suitable for various battery-powered applications.
Q7: Can the S-8252AAW-M6T1U be used with different battery chemistries? A7: No, the S-8252AAW-M6T1U is specifically designed for lithium-ion rechargeable batteries and may not be compatible with other battery chemistries.
Q8: Does the S-8252AAW-M6T1U have any temperature monitoring capabilities? A8: Yes, the S-8252AAW-M6T1U includes a built-in temperature sensor to monitor the battery's temperature and protect it from overheating.
Q9: Is the S-8252AAW-M6T1U suitable for use in portable electronic devices? A9: Absolutely, the S-8252AAW-M6T1U is commonly used in portable electronic devices like smartphones, tablets, and laptops to ensure safe battery operation.
Q10: Are there any additional features or protections provided by the S-8252AAW-M6T1U? A10: Yes, the S-8252AAW-M6T1U also offers reverse battery protection, short-circuit protection, and a sleep mode to minimize power consumption when not in use.
Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.