QD
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
OP4177AR-REEL7
Переглянути деталі Таблиці даних

OP4177AR-REEL7

Product Overview

The OP4177AR-REEL7 is a precision operational amplifier belonging to the category of integrated circuits. It is commonly used in applications requiring high precision and low noise amplification. The device exhibits characteristics such as low offset voltage, low input bias current, and high open-loop gain. It is typically packaged in a small outline package (SOIC) and is available in reels containing a specific quantity of units.

Specifications

  • Supply Voltage: ±2V to ±18V
  • Input Offset Voltage: 50μV maximum
  • Input Bias Current: 0.5nA maximum
  • Open-Loop Gain: 120dB minimum
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOIC-8

Pin Configuration

The OP4177AR-REEL7 features an 8-pin Small Outline Integrated Circuit (SOIC) package with the following pin configuration: 1. Non-Inverting Input (+IN) 2. Inverting Input (-IN) 3. Negative Power Supply (-V) 4. Output (OUT) 5. Positive Power Supply (+V) 6. NC (No Connection) 7. NC (No Connection) 8. V- (Negative Power Supply)

Functional Features

The OP4177AR-REEL7 is designed to provide high precision amplification with low noise, making it suitable for applications requiring accurate signal processing. Its high open-loop gain and low offset voltage contribute to its exceptional performance in precision measurement and instrumentation systems.

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Low noise performance
  • Wide supply voltage range

Disadvantages

  • Limited bandwidth compared to some alternative models
  • Relatively higher power consumption

Working Principles

The OP4177AR-REEL7 operates based on the principles of differential amplification, where the difference between the two input voltages is amplified to produce the output voltage. The internal circuitry is designed to minimize offset voltage and input bias current, ensuring accurate amplification of small signals.

Application Field Plans

The OP4177AR-REEL7 finds extensive use in various precision measurement and instrumentation applications, including: - Data acquisition systems - Sensor signal conditioning - Test and measurement equipment - Precision voltage/current sources - Medical instrumentation

Alternative Models

For applications requiring similar functionality, alternative models to the OP4177AR-REEL7 include: - AD8628 - LT1677 - OPA277

In conclusion, the OP4177AR-REEL7 is a precision operational amplifier that offers high accuracy and low noise amplification, making it well-suited for a wide range of precision measurement and instrumentation applications.

Word Count: 330

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням OP4177AR-REEL7 у технічних рішеннях

  1. What is the OP4177AR-REEL7?

    • The OP4177AR-REEL7 is a precision operational amplifier designed for high-performance applications that require low offset voltage and low input bias current.

  2. What are the key features of the OP4177AR-REEL7?

    • The OP4177AR-REEL7 features low offset voltage, low input bias current, low noise, and high open-loop gain, making it suitable for precision instrumentation and sensor interface applications.

  3. What are the typical applications of the OP4177AR-REEL7?

    • Typical applications include precision instrumentation, sensor interfaces, data acquisition systems, and other high-accuracy analog signal processing applications.

  4. What is the supply voltage range for the OP4177AR-REEL7?

    • The OP4177AR-REEL7 operates from a wide supply voltage range, typically between ±2.25V and ±18V, making it suitable for various power supply configurations.

  5. What is the input offset voltage of the OP4177AR-REEL7?

    • The input offset voltage is typically very low, in the microvolt range, ensuring accurate amplification of small signals.

  6. Does the OP4177AR-REEL7 have built-in protection features?

    • Yes, it includes built-in electrostatic discharge (ESD) protection and internal thermal shutdown to ensure reliability in harsh operating conditions.

  7. What is the temperature range for the OP4177AR-REEL7?

    • The OP4177AR-REEL7 is designed to operate over a wide temperature range, typically from -40°C to 125°C, making it suitable for industrial and automotive applications.

  8. Can the OP4177AR-REEL7 be used in single-supply applications?

    • Yes, it can be used in single-supply applications with proper consideration of common-mode voltage and output swing limitations.

  9. What is the recommended circuit configuration for the OP4177AR-REEL7?

    • A typical non-inverting or inverting amplifier configuration with appropriate feedback components is commonly used with the OP4177AR-REEL7.

  10. Is the OP4177AR-REEL7 RoHS compliant?

    • Yes, the OP4177AR-REEL7 is RoHS compliant, making it suitable for use in environmentally sensitive applications.