Cantherm
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MF72-002.5D13
Переглянути деталі Таблиці даних

MF72-002.5D13

Product Overview

Category

The MF72-002.5D13 belongs to the category of NTC thermistors.

Use

It is commonly used for temperature sensing, control, and compensation in various electronic circuits and devices.

Characteristics

  • Resistance: 2.5Ω at 25°C
  • Temperature Coefficient: -13%/°C
  • Stability: High stability over a wide temperature range
  • Reliability: Reliable performance in demanding environments

Package

The MF72-002.5D13 is typically available in a small, cylindrical package.

Essence

This NTC thermistor serves as a crucial component in maintaining precise temperature control in electronic systems.

Packaging/Quantity

The MF72-002.5D13 is usually packaged in reels or trays, with quantities varying based on customer requirements.

Specifications

  • Resistance at 25°C: 2.5Ω
  • Temperature Coefficient: -13%/°C
  • Operating Temperature Range: -55°C to 125°C
  • Maximum Power Rating: X watts
  • Thermal Time Constant: Y seconds

Detailed Pin Configuration

The MF72-002.5D13 features two leads for connection, with the pinout configuration as follows: 1. Pin 1: [Description] 2. Pin 2: [Description]

Functional Features

  • Temperature Sensing: Accurately measures temperature changes.
  • Control and Compensation: Provides precise control and compensation for temperature variations.
  • Stability: Maintains stable resistance characteristics across a wide temperature range.

Advantages

  • High Precision: Offers high precision in temperature measurement and control.
  • Wide Operating Range: Suitable for applications spanning a broad temperature spectrum.
  • Reliability: Ensures reliable performance in diverse environmental conditions.

Disadvantages

  • Nonlinear Response: May exhibit a nonlinear response in certain temperature ranges.
  • Calibration: Requires careful calibration for specific applications.

Working Principles

The MF72-002.5D13 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases with increasing temperature. This characteristic enables it to accurately sense and respond to temperature changes within electronic systems.

Detailed Application Field Plans

The MF72-002.5D13 finds extensive application in various fields, including: - Automotive Electronics: Used for temperature monitoring in engine management systems. - Consumer Electronics: Employed in air conditioning units, refrigerators, and other appliances for temperature control. - Industrial Automation: Utilized in industrial equipment for temperature compensation and regulation.

Detailed and Complete Alternative Models

  • MF72-005D20: A higher resistance variant suitable for specific temperature control applications.
  • MF72-001.8D07: Lower resistance option for applications requiring different temperature sensitivity.

In conclusion, the MF72-002.5D13 NTC thermistor offers precise temperature sensing and control capabilities, making it an essential component in various electronic systems across different industries.

[Word count: 443]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MF72-002.5D13 у технічних рішеннях

  1. What is MF72-002.5D13?

    • MF72-002.5D13 is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of MF72-002.5D13?

    • MF72-002.5D13 is commonly used for temperature compensation, temperature measurement, and temperature control in various electronic devices and circuits.

  3. What is the operating temperature range of MF72-002.5D13?

    • The operating temperature range of MF72-002.5D13 is typically from -55°C to 125°C.

  4. How does MF72-002.5D13 behave in different temperature environments?

    • MF72-002.5D13 exhibits a negative temperature coefficient (NTC) behavior, meaning its resistance decreases as the temperature increases.

  5. Can MF72-002.5D13 be used for overcurrent protection?

    • Yes, MF72-002.5D13 can be utilized for overcurrent protection due to its ability to exhibit a significant change in resistance with temperature variations.

  6. What are the key electrical characteristics of MF72-002.5D13?

    • The key electrical characteristics include its resistance at room temperature, thermal time constant, maximum power rating, and voltage rating.

  7. How can MF72-002.5D13 be integrated into a circuit for temperature compensation?

    • MF72-002.5D13 can be connected in series or parallel with other components to provide temperature compensation in circuits, such as in oscillator circuits or sensor interfaces.

  8. Are there any precautions to consider when using MF72-002.5D13 in technical solutions?

    • It's important to consider the self-heating effect of MF72-002.5D13, as well as its response time and stability in the intended application environment.

  9. What are the potential failure modes of MF72-002.5D13 in technical solutions?

    • Potential failure modes may include overheating, mechanical damage, or exceeding the specified voltage or current ratings.

  10. Can MF72-002.5D13 be used in automotive applications?

    • Yes, MF72-002.5D13 is suitable for automotive applications, such as temperature sensing in engine management systems or climate control systems.