E-T-A
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
2-5700-IG1-P10-A3-0.1A
Переглянути деталі Таблиці даних

2-5700-IG1-P10-A3-0.1A Product Encyclopedia Entry

Introduction

The 2-5700-IG1-P10-A3-0.1A is a crucial component in the field of electronic devices and systems. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: This product is used as a precision current sensor in various electronic applications.
  • Characteristics: The 2-5700-IG1-P10-A3-0.1A is known for its high accuracy, compact size, and reliable performance.
  • Package: It is typically available in a small, surface-mount package.
  • Essence: The essence of this product lies in its ability to accurately measure low currents in electronic circuits.
  • Packaging/Quantity: It is commonly packaged in reels containing multiple units.

Specifications

  • Model Number: 2-5700-IG1-P10-A3-0.1A
  • Current Sensing Range: 0 to 0.1A
  • Operating Temperature: -40°C to 125°C
  • Output Type: Analog Voltage
  • Accuracy: ±1%

Detailed Pin Configuration

The 2-5700-IG1-P10-A3-0.1A features a standard 4-pin configuration: 1. VCC (Power Supply) 2. GND (Ground) 3. OUT (Analog Output) 4. NC (Not Connected)

Functional Features

  • Accurate current sensing
  • Low power consumption
  • Wide operating temperature range
  • Small form factor

Advantages and Disadvantages

Advantages

  • High accuracy
  • Compact size
  • Suitable for low current measurements

Disadvantages

  • Limited current sensing range
  • Analog output may require additional circuitry for digital interfacing

Working Principles

The 2-5700-IG1-P10-A3-0.1A operates on the principle of Hall Effect, where the magnetic field generated by the current passing through the sensor causes a proportional voltage output.

Detailed Application Field Plans

This product finds extensive use in various applications, including: - Battery management systems - Power supplies - Motor control - IoT devices

Detailed and Complete Alternative Models

  • 2-5701-IG1-P10-A3-0.2A
  • 2-5702-IG1-P10-A3-0.5A
  • 2-5703-IG1-P10-A3-1A

In conclusion, the 2-5700-IG1-P10-A3-0.1A plays a critical role in enabling precise current measurements in electronic systems, making it an indispensable component in modern electronic design and manufacturing.

[Word Count: 399]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням 2-5700-IG1-P10-A3-0.1A у технічних рішеннях

  1. What is the application of 2-5700-IG1-P10-A3-0.1A?

    • The 2-5700-IG1-P10-A3-0.1A is a current transformer used for measuring and monitoring electrical currents in various technical solutions.

  2. Where can 2-5700-IG1-P10-A3-0.1A be used?

    • It can be used in power distribution systems, industrial automation, renewable energy systems, and other applications where accurate current measurement is required.

  3. What is the accuracy of 2-5700-IG1-P10-A3-0.1A?

    • The accuracy of this current transformer is typically 0.1% or better, ensuring precise current measurements in technical solutions.

  4. How does 2-5700-IG1-P10-A3-0.1A connect to the system?

    • It is typically connected in series with the conductor carrying the current to be measured, and its output is then connected to a measuring or monitoring device.

  5. What is the frequency range of 2-5700-IG1-P10-A3-0.1A?

    • This current transformer is designed to operate within a specific frequency range, typically from 50Hz to 60Hz, making it suitable for standard power systems.

  6. Can 2-5700-IG1-P10-A3-0.1A be used for high-voltage applications?

    • Yes, it can be used for high-voltage applications when appropriately insulated and designed for the specific voltage levels.

  7. Is 2-5700-IG1-P10-A3-0.1A suitable for outdoor use?

    • Depending on its IP rating and construction, it can be suitable for outdoor use, but environmental factors should be considered to ensure proper performance and longevity.

  8. What are the typical mounting options for 2-5700-IG1-P10-A3-0.1A?

    • It can be mounted on DIN rails, panels, or directly onto equipment, providing flexibility in installation within technical solutions.

  9. Does 2-5700-IG1-P10-A3-0.1A require calibration?

    • Periodic calibration may be necessary to maintain its accuracy, especially if it's subjected to harsh operating conditions or overcurrent events.

  10. Are there any safety considerations when using 2-5700-IG1-P10-A3-0.1A?

    • Proper insulation, grounding, and adherence to safety standards are essential to ensure safe and reliable operation when integrating this current transformer into technical solutions.