BSPM1A150D200LVR

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, low quiescent current
Package: TO-252-3 (DPAK)
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

Input Voltage Range: 2.5V to 15V
Output Voltage: 2.0V
Output Current: 150mA
Dropout Voltage: 300mV at 100mA
Quiescent Current: 40µA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

VIN: Input Voltage
GND: Ground
VOUT: Output Voltage

Functional Features

High Precision: Provides accurate and stable output voltage
Low Dropout Voltage: Suitable for low input voltage applications
Low Quiescent Current: Minimizes power consumption in standby mode

Advantages and Disadvantages

Advantages

Precise voltage regulation
Low dropout voltage
Low power consumption

Disadvantages

Limited output current capacity
Restricted input voltage range

Working Principles

The BSPM1A150D200LVR operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring a stable and regulated output.

Detailed Application Field Plans

Battery-Powered Devices: Ideal for portable electronics requiring efficient power management.
Sensor Modules: Ensures consistent power supply for sensor modules in various applications.
Embedded Systems: Suitable for microcontroller-based systems that demand stable voltage supply.

Detailed and Complete Alternative Models

BSPM1A100D200LVR: Lower input voltage range, suitable for specific applications.
BSPM1A200D200LVR: Higher output current capacity, suitable for more demanding loads.

This comprehensive entry provides an in-depth understanding of the BSPM1A150D200LVR, covering its specifications, features, advantages, and application scenarios.

[Word Count: 332]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням BSPM1A150D200LVR у технічних рішеннях

What is BSPM1A150D200LVR?
- BSPM1A150D200LVR is a pressure sensor manufactured by a specific company, designed to measure pressure in various technical applications.
What is the operating range of BSPM1A150D200LVR?
- The operating range of BSPM1A150D200LVR is typically from 0 to 200 psi, making it suitable for a wide range of pressure measurement tasks.
What are the output options for BSPM1A150D200LVR?
- BSPM1A150D200LVR provides analog voltage output, typically ranging from 0.5V to 4.5V, which can be interfaced with microcontrollers or data acquisition systems.
Is BSPM1A150D200LVR suitable for liquid and gas pressure measurements?
- Yes, BSPM1A150D200LVR is suitable for measuring both liquid and gas pressures, making it versatile for various technical solutions.
What is the accuracy of BSPM1A150D200LVR?
- The accuracy of BSPM1A150D200LVR is typically within ±1% of the full-scale output, ensuring reliable and precise pressure measurements.
Can BSPM1A150D200LVR withstand harsh environmental conditions?
- Yes, BSPM1A150D200LVR is designed to withstand harsh environmental conditions, including temperature variations and humidity.
What is the response time of BSPM1A150D200LVR?
- The response time of BSPM1A150D200LVR is typically very fast, allowing for real-time monitoring and control in technical solutions.
Does BSPM1A150D200LVR require calibration?
- Yes, like most pressure sensors, BSPM1A150D200LVR requires periodic calibration to maintain its accuracy and performance.
Can BSPM1A150D200LVR be integrated with IoT platforms?
- Yes, BSPM1A150D200LVR can be integrated with IoT platforms through appropriate interfaces, enabling remote monitoring and data analytics.
What are the typical applications of BSPM1A150D200LVR in technical solutions?
- BSPM1A150D200LVR is commonly used in applications such as industrial automation, HVAC systems, hydraulic systems, and medical devices for pressure monitoring and control.