Global Power Technologies Group
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
GP2D010A170B
Переглянути деталі Таблиці даних

GP2D010A170B

Product Overview

The GP2D010A170B belongs to the category of distance measuring sensors. It is commonly used for detecting the distance between the sensor and an object, making it suitable for various applications such as robotics, automation, and proximity sensing. The characteristics of this sensor include its compact size, high accuracy, and low power consumption. The package typically includes the sensor itself along with any necessary connectors or mounting hardware. The essence of the GP2D010A170B lies in its ability to provide precise distance measurements in a wide range of environments. The packaging usually consists of individual units, and the quantity may vary based on the supplier.

Specifications

  • Operating Voltage: 4.5V to 5.5V
  • Detection Range: 10cm to 80cm
  • Output: Analog voltage proportional to the measured distance
  • Dimensions: 29.5mm x 13.0mm x 13.5mm
  • Weight: 3.5g

Detailed Pin Configuration

The GP2D010A170B sensor typically features three pins: 1. VCC - Power supply input 2. GND - Ground connection 3. Vo - Analog output voltage

Functional Features

  • Precise distance measurement
  • Compact and lightweight design
  • Low power consumption
  • Wide detection range

Advantages and Disadvantages

Advantages

  • Accurate distance measurement
  • Suitable for various applications
  • Low power consumption

Disadvantages

  • Limited detection range compared to some other sensors
  • Analog output requires additional processing for digital systems

Working Principles

The GP2D010A170B operates based on the principle of triangulation. It emits infrared light towards the target object and measures the time taken for the light to be reflected back to the sensor. By analyzing this time delay, the sensor calculates the distance to the object.

Detailed Application Field Plans

The GP2D010A170B sensor finds extensive use in robotics for obstacle detection and avoidance. It is also employed in industrial automation for proximity sensing and object detection. Additionally, it is utilized in consumer electronics for touchless interfaces and gesture recognition applications.

Detailed and Complete Alternative Models

Some alternative models to the GP2D010A170B sensor include: - Sharp GP2Y0A21YK0F - Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance Sensor 10-150cm

In conclusion, the GP2D010A170B distance measuring sensor offers precise and reliable distance measurements within a compact form factor. Its wide range of applications and functional features make it a valuable component in various electronic and robotic systems.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням GP2D010A170B у технічних рішеннях

  1. What is the GP2D010A170B sensor used for?

    • The GP2D010A170B sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2D010A170B sensor?

    • The operating voltage of the GP2D010A170B sensor is typically around 5V.

  3. How does the GP2D010A170B sensor measure distance?

    • The GP2D010A170B sensor measures distance using infrared light and triangulation principles.

  4. What is the sensing range of the GP2D010A170B sensor?

    • The sensing range of the GP2D010A170B sensor is approximately 10cm to 80cm.

  5. Can the GP2D010A170B sensor be used outdoors?

    • The GP2D010A170B sensor is primarily designed for indoor use and may not perform reliably outdoors due to interference from sunlight and other environmental factors.

  6. What are some common applications of the GP2D010A170B sensor?

    • Common applications of the GP2D010A170B sensor include robotics, automation, and proximity sensing in various technical solutions.

  7. Does the GP2D010A170B sensor require calibration?

    • Yes, the GP2D010A170B sensor may require calibration to ensure accurate distance measurements.

  8. Is the GP2D010A170B sensor affected by ambient light?

    • The GP2D010A170B sensor can be affected by ambient light, so it's important to consider lighting conditions when using the sensor.

  9. What output does the GP2D010A170B sensor provide?

    • The GP2D010A170B sensor typically provides an analog output voltage proportional to the measured distance.

  10. Are there any limitations to consider when using the GP2D010A170B sensor?

    • Some limitations to consider when using the GP2D010A170B sensor include its limited range, susceptibility to ambient light, and the need for proper calibration for accurate measurements.