8T49N008A-051NLGI

Basic Information Overview

Category: Electronic Component
Use: Clock Generator and Jitter Attenuator
Characteristics:
- High precision and low jitter output clock signals
- Flexible configuration options
- Wide operating frequency range
Package: QFN (Quad Flat No-leads)
Essence: Provides stable and accurate clock signals for various electronic devices
Packaging/Quantity: Typically sold in reels of 250 units

Specifications and Parameters

Input Voltage Range: 1.8V to 3.3V
Output Frequency Range: 10MHz to 2.1GHz
Output Types: LVPECL, LVDS, HCSL
Operating Temperature Range: -40°C to +85°C
Supply Current: 80mA (typical)

Detailed and Complete Pin Configuration

The 8T49N008A-051NLGI has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | OUT0 | Output 0 | | 4 | OUT1 | Output 1 | | ... | ... | ... | | 31 | OUT30 | Output 30 | | 32 | OUT31 | Output 31 |

Functional Characteristics

Clock Generation: The device generates high-quality clock signals with low jitter.
Jitter Attenuation: It reduces the amount of jitter present in the input clock signal.
Frequency Synthesis: The device can generate output frequencies that are multiples or fractions of the input frequency.
Configuration Options: Various settings can be adjusted to meet specific requirements.

Advantages and Disadvantages

Advantages: - High precision and low jitter output signals - Flexible configuration options for customization - Wide operating frequency range

Disadvantages: - Relatively high power consumption compared to some alternatives - Limited number of output channels (32)

Applicable Range of Products

The 8T49N008A-051NLGI is suitable for use in a wide range of electronic devices that require stable and accurate clock signals. It finds applications in telecommunications, networking equipment, data centers, and consumer electronics.

Working Principles

The device utilizes advanced clock generation and jitter attenuation techniques. It takes an input clock signal and processes it to generate multiple output clock signals with precise timing characteristics. The internal circuitry ensures low jitter and high accuracy by employing various synchronization and filtering mechanisms.

Detailed Application Field Plans

The 8T49N008A-051NLGI can be used in various applications, including: 1. Network switches and routers: Provides synchronized clock signals for data transmission. 2. Wireless communication systems: Ensures accurate timing for seamless connectivity. 3. Test and measurement equipment: Generates precise clock signals for accurate measurements. 4. Audio/video equipment: Synchronizes audio and video streams for optimal playback quality. 5. Industrial automation: Enables precise timing in control systems for improved efficiency.

Detailed Alternative Models

Some alternative models to the 8T49N008A-051NLGI include: - 8T49N002A-051NLGI: Similar functionality but with fewer output channels. - 8T49N010A-051NLGI: Offers additional features such as frequency margining and spread spectrum modulation.

5 Common Technical Questions and Answers

Q: What is the maximum output frequency of the 8T49N008A-051NLGI? A: The device can generate output frequencies up to 2.1GHz.
Q: Can I use a lower input voltage than the specified range? A: No, the device requires an input voltage within the specified range for proper operation.
Q: How many output channels does the 8T49N008A-051NLGI have? A: It has a total of 32 output channels.
Q: What is the typical power consumption of the device? A: The typical supply current is 80mA.
Q: Can the device generate non-standard output frequencies? A: Yes, the device supports frequency synthesis and can generate frequencies that are multiples or fractions of the input frequency.

This encyclopedia entry provides an overview of the 8T49N008A-051NLGI clock generator and jitter attenuator. It includes basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.