IDT, Integrated Device Technology Inc
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
IDT5V2528PGGI
Переглянути деталі Таблиці даних

IDT5V2528PGGI

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Level Translator
  • Characteristics: Bi-directional, 8-bit, non-inverting
  • Package: TSSOP-20
  • Essence: Translates voltage levels between two different logic families
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range (A Port): 0V to VCCA + 0.5V
  • Input Voltage Range (B Port): 0V to VCCB + 0.5V
  • Output Voltage Range (A Port): 0V to VCCA + 0.5V
  • Output Voltage Range (B Port): 0V to VCCB + 0.5V
  • Maximum Data Rate: 100 Mbps
  • Low Power Consumption: < 10 µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The IDT5V2528PGGI has a total of 20 pins. The pin configuration is as follows:

  1. OE (Output Enable)
  2. A1 (Data Input/Output Channel 1)
  3. A2 (Data Input/Output Channel 2)
  4. A3 (Data Input/Output Channel 3)
  5. A4 (Data Input/Output Channel 4)
  6. A5 (Data Input/Output Channel 5)
  7. A6 (Data Input/Output Channel 6)
  8. A7 (Data Input/Output Channel 7)
  9. A8 (Data Input/Output Channel 8)
  10. GND (Ground)
  11. B8 (Data Input/Output Channel 8)
  12. B7 (Data Input/Output Channel 7)
  13. B6 (Data Input/Output Channel 6)
  14. B5 (Data Input/Output Channel 5)
  15. B4 (Data Input/Output Channel 4)
  16. B3 (Data Input/Output Channel 3)
  17. B2 (Data Input/Output Channel 2)
  18. B1 (Data Input/Output Channel 1)
  19. VCCA (Voltage Supply for A Port)
  20. VCCB (Voltage Supply for B Port)

Functional Features

  • Bi-directional voltage level translation between two different logic families
  • Non-inverting translation, maintaining signal integrity
  • Supports bidirectional data flow
  • Low power consumption, suitable for battery-powered applications
  • Wide operating temperature range for various environments

Advantages and Disadvantages

Advantages: - Bi-directional translation simplifies circuit design - Non-inverting translation preserves signal quality - Low power consumption extends battery life - Wide operating temperature range allows for versatile applications

Disadvantages: - Limited to 8-bit data transmission - Maximum data rate of 100 Mbps may not be sufficient for high-speed applications

Working Principles

The IDT5V2528PGGI is a voltage level translator that enables communication between two different logic families. It operates by receiving input signals from one logic family (A Port) and translating them to the corresponding voltage levels of another logic family (B Port). The translation is non-inverting, ensuring that the output signals maintain the same logic state as the input signals.

The device utilizes internal circuitry to handle the voltage level shifting, allowing seamless bidirectional data flow between the two logic families. It supports a wide supply voltage range and has low power consumption, making it suitable for various applications, including battery-powered devices.

Detailed Application Field Plans

The IDT5V2528PGGI can be used in a wide range of applications that require voltage level translation between different logic families. Some potential application fields include:

  1. Microcontroller Interfacing: The device can be used to interface microcontrollers operating at different voltage levels, enabling communication between them.

  2. Sensor Networks: It can be employed in sensor networks where sensors with different logic families need to communicate with each other.

  3. Industrial Automation: The voltage level translator can facilitate communication between different industrial automation systems, ensuring compatibility and interoperability.

  4. Consumer Electronics: It can be utilized in consumer electronic devices that require voltage level translation, such as smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

  1. TXB0108: 8-bit bidirectional voltage-level translator with automatic direction sensing.
  2. SN74LVC8T245: 8-bit dual-supply bus transceiver with configurable voltage translation and integrated pull-up resistors.
  3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator with an enable input.

These alternative models offer similar functionality and can be considered as alternatives to the IDT5

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням IDT5V2528PGGI у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of IDT5V2528PGGI in technical solutions:

  1. Q: What is IDT5V2528PGGI? A: IDT5V2528PGGI is a specific integrated circuit (IC) manufactured by Integrated Device Technology (IDT). It is a voltage level translator designed for use in various technical applications.

  2. Q: What is the purpose of IDT5V2528PGGI? A: The purpose of IDT5V2528PGGI is to translate voltage levels between different logic families, allowing communication between devices that operate at different voltage levels.

  3. Q: Which logic families does IDT5V2528PGGI support? A: IDT5V2528PGGI supports translation between TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic families.

  4. Q: What is the voltage range supported by IDT5V2528PGGI? A: IDT5V2528PGGI supports voltage translation from 1.65V to 5.5V on the A-side and 2.3V to 5.5V on the B-side.

  5. Q: Can IDT5V2528PGGI be used bidirectionally? A: Yes, IDT5V2528PGGI can be used bidirectionally, allowing voltage translation in both directions.

  6. Q: What is the maximum data rate supported by IDT5V2528PGGI? A: IDT5V2528PGGI supports a maximum data rate of 100 Mbps.

  7. Q: Is IDT5V2528PGGI suitable for high-speed applications? A: No, IDT5V2528PGGI is not specifically designed for high-speed applications. It is more commonly used in general-purpose voltage translation scenarios.

  8. Q: Can IDT5V2528PGGI be used in automotive applications? A: Yes, IDT5V2528PGGI is suitable for automotive applications as it can operate within the required voltage ranges and temperature specifications.

  9. Q: Does IDT5V2528PGGI require external components for operation? A: Yes, IDT5V2528PGGI requires external pull-up resistors to function properly.

  10. Q: Where can I find more information about IDT5V2528PGGI? A: You can find detailed information about IDT5V2528PGGI in the datasheet provided by Integrated Device Technology (IDT) or on their official website.