Infineon Technologies
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
ICE3B2065JFKLA1
Переглянути деталі Таблиці даних

ICE3B2065JFKLA1

Product Overview

Category

The ICE3B2065JFKLA1 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used in power supply applications.

Characteristics

  • High efficiency
  • Low standby power consumption
  • Wide input voltage range
  • Over-temperature protection
  • Overload protection

Package

The ICE3B2065JFKLA1 is available in a compact and industry-standard package, such as a DIP-8 or SOP-8 package.

Essence

The essence of this product lies in its ability to efficiently regulate and control power supply in various electronic devices.

Packaging/Quantity

The ICE3B2065JFKLA1 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Power: Up to 65W
  • Switching Frequency: 65kHz
  • Operating Temperature Range: -40°C to +125°C
  • Standby Power Consumption: Less than 100mW

Detailed Pin Configuration

The ICE3B2065JFKLA1 has the following pin configuration:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. FB - Feedback pin for regulation
  4. CS - Current sense input
  5. COMP - Compensation pin for stability
  6. SS - Soft-start pin
  7. VSENSE - Voltage sense input
  8. HV - High-voltage pin for power switching

Functional Features

  • Integrated PWM controller
  • Built-in protection features (over-temperature, overload)
  • Soft-start function for smooth power-up
  • Constant voltage (CV) and constant current (CC) operation modes
  • Adjustable output voltage and current

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings
  • Wide input voltage range allows for versatile applications
  • Over-temperature and overload protection enhance reliability
  • Compact package size enables space-saving designs

Disadvantages

  • Limited output power compared to higher-rated devices
  • Higher cost compared to non-integrated solutions

Working Principles

The ICE3B2065JFKLA1 operates based on the principles of pulse width modulation (PWM) control. It regulates the output voltage and current by adjusting the duty cycle of the switching signal. This control mechanism ensures efficient power transfer from the input to the output, while maintaining stability and protection features.

Detailed Application Field Plans

The ICE3B2065JFKLA1 is commonly used in various power supply applications, including:

  1. AC-DC converters for consumer electronics
  2. LED lighting drivers
  3. Industrial power supplies
  4. Telecom power systems
  5. Battery chargers

Detailed and Complete Alternative Models

  1. ICE3B0565JFKLA1 - Lower power variant with similar features
  2. ICE3B1565JFKLA1 - Higher power variant with similar features
  3. ICE3A0565JFKLA1 - Alternative model with different pin configuration but similar functionality
  4. ICE3A0765JFKLA1 - Alternative model with higher power rating and additional features

(Note: The above alternative models are provided for reference and may vary based on availability and specific requirements.)

Word count: 499 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням ICE3B2065JFKLA1 у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of ICE3B2065JFKLA1 in technical solutions:

Q1: What is ICE3B2065JFKLA1? A1: ICE3B2065JFKLA1 is a specific model of Integrated Circuit (IC) designed for power management applications.

Q2: What are the main features of ICE3B2065JFKLA1? A2: The main features of ICE3B2065JFKLA1 include high efficiency, low standby power consumption, built-in protection mechanisms, and compatibility with various power supply topologies.

Q3: What are the typical applications of ICE3B2065JFKLA1? A3: ICE3B2065JFKLA1 is commonly used in applications such as switch-mode power supplies (SMPS), LED lighting systems, motor control circuits, and other power management solutions.

Q4: How does ICE3B2065JFKLA1 help in power management? A4: ICE3B2065JFKLA1 integrates various functions like PWM controller, gate driver, and protection circuitry, which enable efficient power conversion and control in different applications.

Q5: What is the maximum voltage and current rating of ICE3B2065JFKLA1? A5: ICE3B2065JFKLA1 has a maximum voltage rating of [insert value] and a maximum current rating of [insert value].

Q6: Can ICE3B2065JFKLA1 operate at high temperatures? A6: Yes, ICE3B2065JFKLA1 is designed to operate reliably at elevated temperatures, typically up to [insert temperature value].

Q7: Is ICE3B2065JFKLA1 compatible with both AC and DC input sources? A7: Yes, ICE3B2065JFKLA1 can be used with both AC and DC input sources, making it versatile for various power supply applications.

Q8: Does ICE3B2065JFKLA1 have built-in protection features? A8: Yes, ICE3B2065JFKLA1 incorporates protection mechanisms such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown to safeguard the circuitry and connected components.

Q9: Can ICE3B2065JFKLA1 be used in high-frequency switching applications? A9: Yes, ICE3B2065JFKLA1 is designed to operate at high switching frequencies, making it suitable for applications that require fast power switching.

Q10: Are there any application notes or reference designs available for ICE3B2065JFKLA1? A10: Yes, the manufacturer of ICE3B2065JFKLA1 typically provides application notes, datasheets, and reference designs that offer guidance on using the IC effectively in different technical solutions.

Please note that the answers provided above are general and may vary depending on the specific requirements and datasheet of ICE3B2065JFKLA1.