Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
TLE49611LHALA1

TLE49611LHALA1

Product Overview

The TLE49611LHALA1 belongs to the category of Hall Effect sensors and is commonly used for position sensing in automotive and industrial applications. This sensor possesses characteristics such as high sensitivity, low power consumption, and robustness. It is typically packaged in a small surface-mount package and is available in various quantities.

Specifications

  • Operating Voltage: 3.8V to 24V
  • Output Current: 20mA
  • Operating Temperature Range: -40°C to 150°C
  • Package Type: SOT23

Detailed Pin Configuration

The TLE49611LHALA1 has three pins: 1. VCC (Power supply) 2. GND (Ground) 3. OUT (Output)

Functional Features

  • High sensitivity to magnetic fields
  • Reverse polarity protection
  • Wide operating voltage range

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Robust design
  • Wide temperature range operation

Disadvantages

  • Limited output current
  • Sensitivity to external magnetic interference

Working Principles

The TLE49611LHALA1 operates based on the Hall Effect, where a voltage difference is created across a conductor when subjected to a magnetic field. This voltage difference is then measured to determine the presence and strength of the magnetic field, enabling accurate position sensing.

Detailed Application Field Plans

The TLE49611LHALA1 is widely used in the following applications: - Automotive: Position sensing in throttle pedals, gear shifters, and brake systems - Industrial: Speed and position sensing in conveyor belts, motor control, and robotics

Detailed and Complete Alternative Models

Some alternative models to the TLE49611LHALA1 include: - A1324LUA-T (Allegro MicroSystems) - OH090U (TT Electronics) - DRV5053VAQLPG (Texas Instruments)

In conclusion, the TLE49611LHALA1 is a versatile Hall Effect sensor with high sensitivity and robustness, making it suitable for a wide range of automotive and industrial applications.

[Word count: 270]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням TLE49611LHALA1 у технічних рішеннях

  1. What is the TLE49611LHALA1?

    • The TLE49611LHALA1 is a Hall sensor designed for magnetic field sensing in automotive and industrial applications.
  2. What is the operating voltage range of TLE49611LHALA1?

    • The operating voltage range of TLE49611LHALA1 is from 3.5V to 18V.
  3. What is the output type of TLE49611LHALA1?

    • TLE49611LHALA1 has a digital open-drain output.
  4. What is the typical operating temperature range of TLE49611LHALA1?

    • The typical operating temperature range of TLE49611LHALA1 is from -40°C to 150°C.
  5. What are the common applications of TLE49611LHALA1?

    • TLE49611LHALA1 is commonly used in applications such as brushless DC motor commutation, position sensing, and speed measurement.
  6. What is the package type of TLE49611LHALA1?

    • TLE49611LHALA1 comes in a small PG-TDSO-4-1 package.
  7. What is the sensitivity of TLE49611LHALA1?

    • The sensitivity of TLE49611LHALA1 is typically 2.5mT.
  8. Is TLE49611LHALA1 suitable for automotive applications?

    • Yes, TLE49611LHALA1 is designed for automotive applications and meets relevant industry standards.
  9. Does TLE49611LHALA1 have built-in protection features?

    • Yes, TLE49611LHALA1 includes built-in protection against reverse polarity and overvoltage.
  10. Can TLE49611LHALA1 be used in harsh environments?

    • Yes, TLE49611LHALA1 is designed to withstand harsh environmental conditions, making it suitable for industrial and automotive applications.