KEMET
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
TRS1-100MLR00V
Переглянути деталі Таблиці даних

TRS1-100MLR00V

Product Category: Electronic Component

Basic Information Overview: - Category: Voltage Regulator - Use: To regulate the voltage in electronic circuits - Characteristics: High precision, low dropout voltage, thermal shutdown protection - Package: Miniature SOT-23 package - Essence: Provides stable voltage output for electronic devices - Packaging/Quantity: Available in reels of 3000 units

Specifications: - Input Voltage Range: 2.5V to 16V - Output Voltage Range: 1.2V to 15V - Maximum Output Current: 100mA - Dropout Voltage: 190mV at 100mA - Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features: - High accuracy and stability over temperature and load variations - Low quiescent current - Fast transient response - Reverse battery protection - Short-circuit protection

Advantages: - Small package size - Wide input voltage range - Low dropout voltage - Thermal shutdown protection

Disadvantages: - Limited maximum output current - Sensitive to external noise

Working Principles: The TRS1-100MLR00V uses a feedback control loop to maintain a constant output voltage despite changes in input voltage and load current. It compares the actual output voltage to a reference voltage and adjusts the pass transistor to maintain the desired output.

Detailed Application Field Plans: - Battery-powered devices - Portable consumer electronics - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models: 1. LM317 - Adjustable Voltage Regulator 2. LT1763 - Low Dropout Regulator 3. ADP3338 - Ultralow Noise LDO Regulator

This comprehensive entry provides an in-depth understanding of the TRS1-100MLR00V voltage regulator, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням TRS1-100MLR00V у технічних рішеннях

  1. What is TRS1-100MLR00V?

    • TRS1-100MLR00V is a precision resistor with a resistance value of 100 milliohms.

  2. What are the typical applications of TRS1-100MLR00V?

    • TRS1-100MLR00V is commonly used in power electronics, battery management systems, motor control, and current sensing applications.

  3. What is the power rating of TRS1-100MLR00V?

    • The power rating of TRS1-100MLR00V is typically around 1 watt.

  4. What is the tolerance of TRS1-100MLR00V?

    • TRS1-100MLR00V usually has a tolerance of around 1% or 5%.

  5. Can TRS1-100MLR00V be used in high-current applications?

    • Yes, TRS1-100MLR00V is suitable for high-current applications due to its low resistance value.

  6. Is TRS1-100MLR00V suitable for automotive applications?

    • Yes, TRS1-100MLR00V is often used in automotive electronic systems such as electric vehicles and hybrid vehicles.

  7. What is the temperature coefficient of TRS1-100MLR00V?

    • The temperature coefficient of TRS1-100MLR00V is typically around 100 ppm/°C.

  8. Can TRS1-100MLR00V be used in pulse load applications?

    • Yes, TRS1-100MLR00V can handle pulse load applications effectively due to its low resistance and power rating.

  9. Are there any recommended mounting techniques for TRS1-100MLR00V?

    • TRS1-100MLR00V is often mounted using surface mount technology (SMT) or through-hole mounting techniques, depending on the specific application requirements.

  10. Where can I find the datasheet for TRS1-100MLR00V?

    • The datasheet for TRS1-100MLR00V can typically be found on the manufacturer's website or by contacting their technical support team.