Linear Technology/QD Devices
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
LT4256-2IS8#PBF
Переглянути деталі Таблиці даних

LT4256-2IS8#PBF

Product Overview

Category

The LT4256-2IS8#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power sourcing and management in various electronic devices and systems. It provides efficient and reliable power delivery, making it suitable for a wide range of applications.

Characteristics

  • High efficiency: The LT4256-2IS8#PBF offers high power conversion efficiency, minimizing energy losses during power transfer.
  • Wide input voltage range: It can handle a broad range of input voltages, making it versatile for different power supply configurations.
  • Low quiescent current: The device has a low standby power consumption, ensuring minimal power wastage when not actively delivering power.
  • Overcurrent protection: It incorporates overcurrent protection mechanisms to safeguard against excessive current flow, preventing damage to connected devices.

Package

The LT4256-2IS8#PBF comes in an 8-pin small outline integrated circuit (SOIC) package. This package type offers compactness and ease of integration into various circuit designs.

Essence

The essence of the LT4256-2IS8#PBF lies in its ability to efficiently manage power transfer, providing a stable and regulated power supply to connected devices.

Packaging/Quantity

This product is typically available in reels or tubes, with a standard quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4V to 80V
  • Output Voltage Range: 1.2V to 60V
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: 8-pin SOIC

Detailed Pin Configuration

The LT4256-2IS8#PBF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground reference pin
  3. VOUT: Output voltage pin
  4. FB: Feedback pin for voltage regulation
  5. EN: Enable pin for controlling power delivery
  6. SS: Soft-start pin for gradual power ramp-up
  7. PG: Power good indicator pin
  8. NC: No connection pin

Functional Features

  • Voltage Regulation: The LT4256-2IS8#PBF ensures a stable and regulated output voltage, even with varying input voltages.
  • Overcurrent Protection: It incorporates overcurrent protection to prevent damage due to excessive current flow.
  • Soft-Start Functionality: The soft-start feature allows for a gradual increase in power delivery, reducing stress on connected devices during startup.
  • Power Good Indicator: The power good pin provides an indication of the output voltage status, ensuring proper power supply functionality.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Wide input voltage range
  • Compact package size
  • Overcurrent protection mechanism
  • Low quiescent current consumption

Disadvantages

  • Limited maximum output current (3A)
  • Relatively high operating temperature range (-40°C to 125°C)

Working Principles

The LT4256-2IS8#PBF operates based on a switching regulator topology. It utilizes a combination of control circuitry, power MOSFETs, and passive components to efficiently convert and regulate input voltage to the desired output voltage. The device employs pulse-width modulation (PWM) techniques to achieve high power conversion efficiency.

Detailed Application Field Plans

The LT4256-2IS8#PBF finds applications in various fields, including but not limited to: - Industrial automation systems - Automotive electronics - Telecommunications equipment - Power distribution systems - Renewable energy systems

Detailed and Complete Alternative Models

  1. LT4256-1IS8#PBF: Similar to LT4256-2IS8#PBF, but with a maximum output current of 1A.
  2. LT4256-3IS8#PBF: Similar to LT4256-2IS8#PBF, but with a maximum output current of 5A.
  3. LT4256-4IS8#PBF: Similar to LT4256-2IS8#PBF, but with a wider input voltage range (4V to 100V).

These alternative models offer different specifications and capabilities, allowing for flexibility in choosing the most suitable option based on specific application requirements.

In conclusion, the LT4256-2IS8#PBF is a highly efficient power management IC that provides reliable power sourcing and regulation. With its wide input voltage range, compact package size, and overcurrent protection, it offers numerous advantages for various electronic applications. However, it has limitations in terms of maximum output current and operating temperature range. Its working

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням LT4256-2IS8#PBF у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of LT4256-2IS8#PBF in technical solutions:

  1. Q: What is the LT4256-2IS8#PBF? A: The LT4256-2IS8#PBF is a power over Ethernet (PoE) controller designed for use in various technical solutions.

  2. Q: What is the purpose of the LT4256-2IS8#PBF? A: The LT4256-2IS8#PBF provides power management and control functions for PoE applications, allowing devices to receive power and data over an Ethernet connection.

  3. Q: What are the key features of the LT4256-2IS8#PBF? A: Some key features include IEEE 802.3af/at compliance, integrated power MOSFETs, programmable current limit, thermal shutdown protection, and fault detection.

  4. Q: How does the LT4256-2IS8#PBF work? A: The LT4256-2IS8#PBF integrates power sourcing equipment (PSE) functionality, which detects and negotiates power requirements with powered devices (PDs) connected to it.

  5. Q: What is the maximum power output of the LT4256-2IS8#PBF? A: The LT4256-2IS8#PBF can deliver up to 25.5W of power to connected PDs, depending on the power source capabilities.

  6. Q: Can the LT4256-2IS8#PBF be used in both 10/100Mbps and Gigabit Ethernet applications? A: Yes, the LT4256-2IS8#PBF is compatible with both 10/100Mbps and Gigabit Ethernet applications.

  7. Q: Does the LT4256-2IS8#PBF support power classification? A: Yes, the LT4256-2IS8#PBF supports power classification according to IEEE 802.3af/at standards, allowing it to determine the power requirements of connected PDs.

  8. Q: Can the LT4256-2IS8#PBF be used in industrial applications? A: Yes, the LT4256-2IS8#PBF is designed to operate in a wide temperature range and is suitable for various industrial applications.

  9. Q: What protection features does the LT4256-2IS8#PBF offer? A: The LT4256-2IS8#PBF provides protection against overcurrent, overvoltage, undervoltage, and thermal shutdown conditions.

  10. Q: Are there any evaluation boards or reference designs available for the LT4256-2IS8#PBF? A: Yes, Linear Technology (now part of Analog Devices) offers evaluation boards and reference designs that can help users quickly prototype and implement the LT4256-2IS8#PBF in their applications.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.