Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
LTC1155IN8#PBF

LTC1155IN8#PBF

Product Overview

Category

The LTC1155IN8#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management applications.

Characteristics

  • The LTC1155IN8#PBF is a high-performance, dual-channel voltage converter.
  • It operates over a wide input voltage range, making it suitable for various applications.
  • This IC offers excellent efficiency and low quiescent current, ensuring optimal power management.
  • It provides adjustable output voltages, allowing flexibility in design.

Package

The LTC1155IN8#PBF comes in an 8-pin PDIP (Plastic Dual In-line Package) package.

Essence

The essence of this product lies in its ability to efficiently convert input voltages to desired output voltages, enabling proper functioning of electronic devices.

Packaging/Quantity

The LTC1155IN8#PBF is typically packaged in reels or tubes, with a quantity of 75 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 15V
  • Output Voltage Range: Adjustable from 1.24V to 12.6V
  • Maximum Output Current: 100mA per channel
  • Quiescent Current: 50µA per channel
  • Operating Temperature Range: -40°C to 85°C
  • Switching Frequency: 200kHz

Detailed Pin Configuration

The LTC1155IN8#PBF has the following pin configuration:

  1. VIN1: Input voltage for Channel 1
  2. GND1: Ground for Channel 1
  3. VOUT1: Output voltage for Channel 1
  4. FB1: Feedback pin for Channel 1
  5. VIN2: Input voltage for Channel 2
  6. GND2: Ground for Channel 2
  7. VOUT2: Output voltage for Channel 2
  8. FB2: Feedback pin for Channel 2

Functional Features

  • Dual-channel voltage conversion capability.
  • Adjustable output voltages for both channels.
  • Low quiescent current, ensuring efficient power management.
  • Overcurrent and thermal protection features.
  • Soft-start function to minimize inrush current.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency and low quiescent current result in optimal power management.
  • Adjustable output voltages provide flexibility in design.
  • Overcurrent and thermal protection enhance reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • The 8-pin package may limit the number of available I/O pins for other components.

Working Principles

The LTC1155IN8#PBF operates based on a switching regulator topology. It utilizes an internal oscillator to control the switching of power MOSFETs, converting the input voltage to the desired output voltage. The feedback pins (FB1 and FB2) allow the user to set the output voltage levels by connecting external resistors.

Detailed Application Field Plans

The LTC1155IN8#PBF finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Industrial control systems - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LTC1155IN8#PBF include: - LT1172: Single-channel voltage converter with adjustable output voltage. - LT1302: Dual-channel voltage converter with higher maximum output current. - LM2576: Single-channel voltage converter with fixed output voltage options.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 453 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням LTC1155IN8#PBF у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of LTC1155IN8#PBF in technical solutions:

  1. Q: What is LTC1155IN8#PBF? A: LTC1155IN8#PBF is a high-performance, dual, precision operational amplifier with an integrated switched-capacitor voltage converter.

  2. Q: What are the key features of LTC1155IN8#PBF? A: Some key features include low noise, low offset voltage, wide supply voltage range, and high open-loop gain.

  3. Q: What is the typical application of LTC1155IN8#PBF? A: LTC1155IN8#PBF is commonly used in applications such as sensor signal conditioning, data acquisition systems, and precision instrumentation.

  4. Q: What is the voltage range supported by LTC1155IN8#PBF? A: LTC1155IN8#PBF supports a wide supply voltage range from ±2.7V to ±15V.

  5. Q: Can LTC1155IN8#PBF operate with a single power supply? A: Yes, LTC1155IN8#PBF can operate with a single power supply, ranging from 5V to 30V.

  6. Q: Does LTC1155IN8#PBF have built-in protection features? A: Yes, LTC1155IN8#PBF includes built-in protection features such as thermal shutdown and short-circuit protection.

  7. Q: What is the maximum output current of LTC1155IN8#PBF? A: The maximum output current of LTC1155IN8#PBF is typically around 20mA.

  8. Q: Can LTC1155IN8#PBF be used in low-power applications? A: Yes, LTC1155IN8#PBF has a low quiescent current of typically 1.3mA, making it suitable for low-power applications.

  9. Q: Is LTC1155IN8#PBF available in different package options? A: Yes, LTC1155IN8#PBF is available in an 8-pin PDIP package.

  10. Q: Where can I find more information about LTC1155IN8#PBF? A: You can find more detailed information about LTC1155IN8#PBF in the datasheet provided by the manufacturer or on their official website.