Linear Technology/QD Devices
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
LTC4090EDJC-5#PBF
Переглянути деталі Таблиці даних

LTC4090EDJC-5#PBF

Product Overview

Category

The LTC4090EDJC-5#PBF belongs to the category of integrated circuits (ICs) used in power management.

Use

This IC is primarily used for managing and charging single-cell lithium-ion/polymer batteries.

Characteristics

  • The LTC4090EDJC-5#PBF is a highly efficient battery charger and power manager.
  • It offers a wide input voltage range, making it suitable for various applications.
  • This IC provides multiple protection features, ensuring safe and reliable battery charging.
  • It supports USB-compliant charging, making it compatible with a wide range of devices.

Package

The LTC4090EDJC-5#PBF comes in a small form factor 16-pin DFN (Dual Flat No-Lead) package.

Essence

The essence of the LTC4090EDJC-5#PBF lies in its ability to efficiently charge and manage single-cell lithium-ion/polymer batteries while providing necessary protection features.

Packaging/Quantity

This IC is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.95V to 6.5V
  • Charge Current: Up to 1.2A
  • Maximum Battery Voltage: 4.2V
  • Operating Temperature Range: -40°C to 85°C
  • Efficiency: Up to 94%
  • Standby Quiescent Current: 35µA

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VBAT: Battery voltage pin
  4. PROG: Charge current programming pin
  5. STAT: Status output pin
  6. CE: Chip enable pin
  7. TS: Thermistor input pin
  8. ISET: Input current limit programming pin
  9. VOUT: Output voltage pin
  10. PGND: Power ground pin
  11. ILIM: Input current limit pin
  12. SDA: I2C data pin
  13. SCL: I2C clock pin
  14. INTVCC: Internal voltage regulator output pin
  15. FLT: Fault output pin
  16. VCC: Supply voltage pin

Functional Features

  • Integrated battery charger and power manager in a single IC.
  • USB-compliant charging with programmable charge current.
  • Automatic recharge feature for maintaining battery charge.
  • Multiple protection features including overvoltage, undervoltage, and overcurrent protection.
  • Programmable input current limit for power source protection.
  • I2C interface for configuration and monitoring.

Advantages and Disadvantages

Advantages

  • High efficiency charging and power management.
  • Wide input voltage range allows compatibility with various power sources.
  • USB-compliant charging enables compatibility with a wide range of devices.
  • Comprehensive protection features ensure safe battery charging.
  • Small form factor package allows for space-efficient designs.

Disadvantages

  • Limited to single-cell lithium-ion/polymer battery applications.
  • Requires external components for complete system integration.
  • Relatively higher cost compared to simpler battery charging solutions.

Working Principles

The LTC4090EDJC-5#PBF operates by regulating the charging process of a single-cell lithium-ion/polymer battery. It manages the power flow from an input source, such as a USB port or an external power supply, to the battery. The IC monitors the battery voltage, temperature, and charging current to ensure safe and efficient charging. It also provides protection against overvoltage, undervoltage, and overcurrent conditions.

Detailed Application Field Plans

The LTC4090EDJC-5#PBF finds applications in various portable electronic devices, such as smartphones, tablets, digital cameras, and portable media players. It is also suitable for battery-powered IoT devices, wearable devices, and other portable electronics that require efficient charging and power management.

Detailed and Complete Alternative Models

  • LTC4090EDJC-4#PBF: Similar to LTC4090EDJC-5#PBF, but with a maximum battery voltage of 4.1V.
  • LTC4090EDJC-3#PBF: Similar to LTC4090EDJC-5#PBF, but with a maximum battery voltage of 3.9V.
  • LTC4090EDJC-2#PBF: Similar to LTC4090EDJC-5#PBF, but with a maximum battery voltage of 3.7V.

These alternative models provide flexibility in choosing the appropriate maximum battery voltage based on specific application requirements.

(Note: The above content is approximately 500 words. Additional information can be added to meet the required word count of 1100 words.)

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням LTC4090EDJC-5#PBF у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of LTC4090EDJC-5#PBF in technical solutions:

  1. Q: What is LTC4090EDJC-5#PBF? A: LTC4090EDJC-5#PBF is a high-efficiency standalone power manager IC designed for use in battery-powered applications.

  2. Q: What are the key features of LTC4090EDJC-5#PBF? A: Some key features include integrated battery charger, power path controller, and ideal diode controller, as well as support for multiple battery chemistries.

  3. Q: Can LTC4090EDJC-5#PBF charge multiple batteries simultaneously? A: Yes, LTC4090EDJC-5#PBF supports charging multiple batteries in series or parallel configurations.

  4. Q: What is the maximum charging current supported by LTC4090EDJC-5#PBF? A: The maximum charging current is programmable and can be set up to 2A.

  5. Q: Does LTC4090EDJC-5#PBF have overvoltage protection? A: Yes, LTC4090EDJC-5#PBF provides overvoltage protection for both input and output voltages.

  6. Q: Can LTC4090EDJC-5#PBF operate with a wide input voltage range? A: Yes, LTC4090EDJC-5#PBF can operate with an input voltage range of 4V to 36V.

  7. Q: Is LTC4090EDJC-5#PBF suitable for automotive applications? A: Yes, LTC4090EDJC-5#PBF is designed to meet the requirements of automotive applications.

  8. Q: Does LTC4090EDJC-5#PBF have thermal shutdown protection? A: Yes, LTC4090EDJC-5#PBF includes thermal shutdown protection to prevent damage due to excessive heat.

  9. Q: Can LTC4090EDJC-5#PBF operate in low-power mode? A: Yes, LTC4090EDJC-5#PBF has a low-power mode that reduces quiescent current to minimize power consumption.

  10. Q: What are some typical applications for LTC4090EDJC-5#PBF? A: LTC4090EDJC-5#PBF is commonly used in portable devices, IoT applications, and other battery-powered systems where efficient power management is required.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidance.