Деталі продукту див. у специфікаціях.
LTC4307CMS8-1#PBF
Overview
Product Category: Integrated Circuit (IC)
Use: The LTC4307CMS8-1#PBF is a multiprotocol bus buffer that provides bidirectional buffering, level shifting, and hot-swapping capabilities for I2C and SMBus systems.
Characteristics: - Bidirectional buffering - Level shifting - Hot-swapping capability - Supports I2C and SMBus protocols
Package: MSOP-8 package
Essence: The LTC4307CMS8-1#PBF is an essential component for ensuring reliable communication between devices operating on different voltage levels in I2C and SMBus systems.
Packaging/Quantity: The LTC4307CMS8-1#PBF is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 1.65V to 5.5V
- Operating Temperature Range: -40°C to 85°C
- Maximum Data Rate: 400kHz
- Quiescent Current: 1.5μA (typical)
- Rise/Fall Time: 20ns (maximum)
- ESD Protection: ±8kV (Human Body Model)
Pin Configuration
The LTC4307CMS8-1#PBF features the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | SDA | Serial Data Input/Output | | 2 | SCL | Serial Clock Input | | 3 | A1 | Address Input 1 | | 4 | A0 | Address Input 0 | | 5 | GND | Ground | | 6 | VCC | Power Supply | | 7 | SDAOUT | Buffered Serial Data Output | | 8 | SCLIN | Buffered Serial Clock Input |
Functional Features
The LTC4307CMS8-1#PBF offers the following functional features:
Bidirectional buffering: The device provides bidirectional buffering for I2C and SMBus signals, allowing devices operating at different voltage levels to communicate effectively.
Level shifting: It supports level shifting between low-voltage and high-voltage systems, ensuring compatibility and reliable data transfer.
Hot-swapping capability: The LTC4307CMS8-1#PBF enables hot-swapping of I2C and SMBus devices without disrupting the bus operation, preventing data corruption or system damage.
Advantages and Disadvantages
Advantages: - Enables communication between devices operating at different voltage levels - Provides level shifting and hot-swapping capabilities - Supports I2C and SMBus protocols - Low quiescent current consumption - Compact MSOP-8 package
Disadvantages: - Maximum data rate limited to 400kHz - Limited ESD protection compared to some alternative models
Working Principles
The LTC4307CMS8-1#PBF operates by monitoring the bus lines and automatically inserting a buffer between the devices when it detects a potential conflict. It ensures bidirectional communication by actively driving the bus lines to the appropriate voltage levels based on the input signals. The device also incorporates level shifting circuitry to accommodate devices operating at different voltage levels. Additionally, the LTC4307CMS8-1#PBF features built-in protection mechanisms to prevent bus contention and minimize the risk of data corruption during hot-swapping operations.
Application Field Plans
The LTC4307CMS8-1#PBF finds applications in various fields where I2C and SMBus communication is required. Some potential application areas include:
Consumer Electronics: Used in smart TVs, set-top boxes, and audio/video equipment to enable communication between different subsystems.
Industrial Automation: Employed in industrial control systems, PLCs, and sensor networks to facilitate communication between devices operating at different voltage levels.
Automotive Electronics: Integrated into automotive infotainment systems, advanced driver-assistance systems (ADAS), and body control modules to enable reliable communication between various components.
Medical Devices: Utilized in medical equipment such as patient monitors, infusion pumps, and diagnostic devices to ensure seamless communication between different modules.
Alternative Models
PCA9306: Similar bidirectional I2C bus buffer with level shifting capabilities. Offers higher ESD protection but operates at a lower maximum data rate compared to LTC4307CMS8-1#PBF.
TXB0108: Provides bidirectional voltage-level translation for various protocols, including I2C. Supports higher data rates but lacks hot-swapping capability.
BSS138: A low-voltage N-channel MOSFET switch that can be used for level shifting in I2C applications. Requires additional circuitry for bidirectional communication.
4
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням LTC4307CMS8-1#PBF у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of LTC4307CMS8-1#PBF in technical solutions:
Q1: What is LTC4307CMS8-1#PBF? A1: LTC4307CMS8-1#PBF is a specific model number for the LTC4307, which is a hot-swappable 2-wire bus buffer with built-in capacitive isolation.
Q2: What is the purpose of LTC4307CMS8-1#PBF? A2: The LTC4307CMS8-1#PBF is designed to provide level shifting and buffering capabilities for I2C or SMBus systems, allowing multiple devices to communicate on the same bus without conflicts.
Q3: How does LTC4307CMS8-1#PBF prevent bus contention? A3: The LTC4307CMS8-1#PBF uses a bidirectional buffer with automatic current limiting to prevent bus contention and minimize the risk of damage to connected devices.
Q4: Can LTC4307CMS8-1#PBF be used in both 5V and 3.3V systems? A4: Yes, LTC4307CMS8-1#PBF can operate in both 5V and 3.3V systems, making it versatile for various applications.
Q5: Does LTC4307CMS8-1#PBF support high-speed I2C communication? A5: Yes, LTC4307CMS8-1#PBF supports high-speed mode (up to 400kHz) for fast data transfer in I2C or SMBus systems.
Q6: Can LTC4307CMS8-1#PBF be used in hot-swapping applications? A6: Yes, LTC4307CMS8-1#PBF is specifically designed for hot-swapping applications, allowing devices to be added or removed from the bus without disrupting communication.
Q7: How many devices can be connected to LTC4307CMS8-1#PBF? A7: LTC4307CMS8-1#PBF can support multiple devices on the bus, typically up to 400pF of total bus capacitance.
Q8: Does LTC4307CMS8-1#PBF have built-in fault detection features? A8: Yes, LTC4307CMS8-1#PBF has built-in fault detection and reporting capabilities, including stuck bus recovery and bus busy detection.
Q9: Can LTC4307CMS8-1#PBF be used in industrial environments? A9: Yes, LTC4307CMS8-1#PBF is suitable for industrial environments as it operates over a wide temperature range (-40°C to 85°C) and has ESD protection.
Q10: Are there any application notes or reference designs available for LTC4307CMS8-1#PBF? A10: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs for LTC4307CMS8-1#PBF, which can be found on their website.