Meixin Integrated
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MAX6368HKA23+T
Переглянути деталі Таблиці даних

MAX6368HKA23+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Monitor
  • Characteristics: High Accuracy, Low Power Consumption
  • Package: TO-100-8 (Metal Can)
  • Essence: Monitors voltage levels and provides accurate power management
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.6V to 5.5V
  • Threshold Voltage Options: 2.3V
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 1µA (typical)
  • Output Type: Active-Low Push-Pull
  • Reset Timeout Period: 140ms (typical)

Detailed Pin Configuration

The MAX6368HKA23+T IC has a total of 8 pins arranged as follows:

``` ┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MAX6368HKA23+T у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MAX6368HKA23+T in technical solutions:

  1. Q: What is the MAX6368HKA23+T? A: The MAX6368HKA23+T is a voltage monitor and reset IC designed for use in various technical solutions.

  2. Q: What is the purpose of the MAX6368HKA23+T? A: The purpose of this IC is to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.

  3. Q: How does the MAX6368HKA23+T work? A: It continuously monitors the voltage level using an internal voltage reference and comparator, and triggers a reset signal when the voltage drops below the specified threshold.

  4. Q: What is the voltage range that the MAX6368HKA23+T can monitor? A: It can monitor voltages in the range of 0V to 5.5V.

  5. Q: Can the MAX6368HKA23+T be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as it operates within the voltage range commonly found in such systems.

  6. Q: Does the MAX6368HKA23+T have any adjustable parameters? A: Yes, it has an adjustable reset threshold voltage that can be set using external resistors.

  7. Q: What is the typical reset time delay of the MAX6368HKA23+T? A: The typical reset time delay is around 200ms, but it can be adjusted using an external capacitor.

  8. Q: Can the MAX6368HKA23+T be used in high-temperature environments? A: Yes, it has a wide operating temperature range of -40°C to +125°C, making it suitable for high-temperature applications.

  9. Q: Does the MAX6368HKA23+T have any additional features? A: Yes, it has a manual reset input and an active-low reset output, providing flexibility in system design.

  10. Q: What is the package type of the MAX6368HKA23+T? A: It comes in a 3-pin SOT23 package, which is small and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.