Meixin Integrated
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MAX9766ETJ+T
Переглянути деталі Таблиці даних

MAX9766ETJ+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Amplifier
  • Characteristics: High-performance, low-power, stereo audio amplifier
  • Package: 32-pin TQFN (Thin Quad Flat No-Lead) package
  • Essence: Provides high-quality audio amplification in a compact form factor
  • Packaging/Quantity: Tape and reel packaging, available in quantities of 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 14V
  • Output Power: 2 x 10W into 8Ω at 1% THD+N
  • Efficiency: Up to 88%
  • Total Harmonic Distortion + Noise (THD+N): 0.03% at 1kHz, 1W into 8Ω
  • Signal-to-Noise Ratio (SNR): 100dB A-weighted
  • Shutdown Current: <1µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX9766ETJ+T has a total of 32 pins. The pin configuration is as follows:

  1. SHDN - Shutdown Control Input
  2. GND - Ground
  3. INL- - Left Channel Differential Input (Negative)
  4. INL+ - Left Channel Differential Input (Positive)
  5. VDD - Positive Power Supply
  6. BYP - Bypass Capacitor Connection
  7. OUTL - Left Channel Speaker Output
  8. OUTL - Left Channel Speaker Output
  9. OUTL - Left Channel Speaker Output
  10. OUTL - Left Channel Speaker Output
  11. OUTL - Left Channel Speaker Output
  12. OUTL - Left Channel Speaker Output
  13. OUTL - Left Channel Speaker Output
  14. OUTL - Left Channel Speaker Output
  15. OUTL - Left Channel Speaker Output
  16. OUTL - Left Channel Speaker Output
  17. OUTL - Left Channel Speaker Output
  18. OUTL - Left Channel Speaker Output
  19. OUTL - Left Channel Speaker Output
  20. OUTL - Left Channel Speaker Output
  21. OUTL - Left Channel Speaker Output
  22. OUTL - Left Channel Speaker Output
  23. OUTL - Left Channel Speaker Output
  24. OUTL - Left Channel Speaker Output
  25. OUTL - Left Channel Speaker Output
  26. OUTL - Left Channel Speaker Output
  27. OUTL - Left Channel Speaker Output
  28. OUTL - Left Channel Speaker Output
  29. OUTL - Left Channel Speaker Output
  30. OUTL - Left Channel Speaker Output
  31. OUTL - Left Channel Speaker Output
  32. OUTL - Left Channel Speaker Output

Functional Features

  • High-efficiency Class D amplifier architecture
  • Low quiescent current consumption
  • Thermal and short-circuit protection
  • Integrated click-and-pop suppression circuitry
  • Wide supply voltage range for versatile applications

Advantages and Disadvantages

Advantages: - High audio quality with low distortion - Efficient power usage - Compact package size - Integrated protection features

Disadvantages: - Limited output power compared to larger amplifiers - Requires external components for proper operation

Working Principles

The MAX9766ETJ+T is a Class D audio amplifier that utilizes pulse-width modulation (PWM) to convert the input audio signal into a high-frequency square wave. This square wave is then filtered and amplified to drive the connected speakers. The Class D architecture allows for high efficiency and low power consumption while maintaining good audio quality.

Detailed Application Field Plans

The MAX9766ETJ+T is suitable for various audio amplification applications, including:

  1. Portable audio devices
  2. Home theater systems
  3. Automotive audio systems
  4. Multimedia speakers
  5. Gaming consoles

Detailed and Complete Alternative Models

  1. TPA3116D2 - Texas Instruments
  2. STA540 - STMicroelectronics
  3. TAS5630 - Texas Instruments
  4. LM3886 - Texas Instruments
  5. TDA7294 - STMicroelectronics

These alternative models offer similar functionality and can be considered as alternatives to the MAX9766ETJ+T based on specific requirements and design considerations.

Word count: 442 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MAX9766ETJ+T у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MAX9766ETJ+T in technical solutions:

  1. Q: What is the MAX9766ETJ+T? A: The MAX9766ETJ+T is a high-power Class D audio amplifier IC designed for use in various audio applications.

  2. Q: What is the maximum power output of the MAX9766ETJ+T? A: The MAX9766ETJ+T can deliver up to 40W of power into a 4-ohm load.

  3. Q: Can the MAX9766ETJ+T be used in automotive audio systems? A: Yes, the MAX9766ETJ+T is suitable for automotive audio applications and can operate from a wide supply voltage range.

  4. Q: Does the MAX9766ETJ+T require an external heat sink? A: No, the MAX9766ETJ+T has built-in thermal protection and does not require an external heat sink under normal operating conditions.

  5. Q: Can the MAX9766ETJ+T be used with a single-ended power supply? A: Yes, the MAX9766ETJ+T can be operated with either a single-ended or split power supply configuration.

  6. Q: Is the MAX9766ETJ+T compatible with digital audio interfaces? A: Yes, the MAX9766ETJ+T accepts both analog and digital audio inputs, making it compatible with various audio sources.

  7. Q: Can the MAX9766ETJ+T drive low-impedance speakers? A: Yes, the MAX9766ETJ+T is capable of driving speakers with impedance as low as 4 ohms.

  8. Q: Does the MAX9766ETJ+T have built-in protection features? A: Yes, the MAX9766ETJ+T includes protection features such as over-temperature, over-voltage, and short-circuit protection.

  9. Q: Can the MAX9766ETJ+T be used in portable audio devices? A: Yes, the MAX9766ETJ+T is suitable for use in portable audio devices due to its low power consumption and small form factor.

  10. Q: What is the recommended operating voltage range for the MAX9766ETJ+T? A: The MAX9766ETJ+T can operate from a supply voltage range of 8V to 28V, making it compatible with various power sources.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.