Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
24AA08H-I/WF16K

24AA08H-I/WF16K

Product Overview

Category

The 24AA08H-I/WF16K belongs to the category of serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

It is used for non-volatile data storage in various electronic devices such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • High reliability
  • Small form factor

Package

The 24AA08H-I/WF16K is available in a small surface-mount package, typically with 8 pins.

Essence

The essence of this product lies in its ability to store data reliably without the need for continuous power supply.

Packaging/Quantity

It is commonly packaged in reels or tubes and is available in quantities suitable for both prototyping and mass production.

Specifications

  • Memory Size: 8 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0: Chip Address Input
  2. A1: Chip Address Input
  3. A2: Chip Address Input
  4. VSS: Ground
  5. SDA: Serial Data
  6. SCL: Serial Clock
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 32-byte Page Write Buffer
  • Hardware Write-Protect
  • Schmitt Trigger Inputs

Advantages

  • Low power consumption
  • High reliability and endurance
  • Small form factor
  • Easy interfacing with microcontrollers
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24AA08H-I/WF16K operates by using an I2C interface to communicate with a microcontroller or other host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed.

Detailed Application Field Plans

This product is widely used in applications requiring non-volatile memory storage, such as: - Firmware storage in consumer electronics - Parameter storage in automotive systems - Configuration storage in industrial control systems

Detailed and Complete Alternative Models

  • 24LC08B
  • 24FC08
  • AT24C08
  • CAT24C08

In conclusion, the 24AA08H-I/WF16K is a versatile serial EEPROM chip with a wide range of applications due to its reliability, low power consumption, and compact form factor.

Word Count: 460

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням 24AA08H-I/WF16K у технічних рішеннях

  1. What is the maximum clock frequency for 24AA08H-I/WF16K?
    - The maximum clock frequency for 24AA08H-I/WF16K is 1MHz.

  2. What is the operating voltage range for 24AA08H-I/WF16K?
    - The operating voltage range for 24AA08H-I/WF16K is 1.7V to 5.5V.

  3. Can 24AA08H-I/WF16K be used in automotive applications?
    - Yes, 24AA08H-I/WF16K is suitable for automotive applications.

  4. What is the typical write cycle time for 24AA08H-I/WF16K?
    - The typical write cycle time for 24AA08H-I/WF16K is 5ms.

  5. Is 24AA08H-I/WF16K compatible with I2C protocol?
    - Yes, 24AA08H-I/WF16K is compatible with I2C protocol.

  6. What is the maximum ambient temperature for 24AA08H-I/WF16K?
    - The maximum ambient temperature for 24AA08H-I/WF16K is 125°C.

  7. Can 24AA08H-I/WF16K be used in industrial control systems?
    - Yes, 24AA08H-I/WF16K is suitable for use in industrial control systems.

  8. What is the typical standby current for 24AA08H-I/WF16K?
    - The typical standby current for 24AA08H-I/WF16K is 1μA.

  9. Does 24AA08H-I/WF16K have built-in write protection?
    - Yes, 24AA08H-I/WF16K features built-in hardware write protection.

  10. What is the storage temperature range for 24AA08H-I/WF16K?
    - The storage temperature range for 24AA08H-I/WF16K is -65°C to 150°C.