AT27BV010-15JC

Product Overview

Category

AT27BV010-15JC belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for storing and retrieving digital information.

Characteristics

• Non-volatile memory: The AT27BV010-15JC retains stored data even when power is turned off.
• High-speed operation: It operates at a speed of 150 nanoseconds, allowing for quick access to stored data.
• Low power consumption: The product is designed to consume minimal power during operation.
• Wide temperature range: It can operate reliably within a wide temperature range, making it suitable for various environments.

Package

The AT27BV010-15JC is available in a standard 32-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

The essence of this product lies in its ability to provide non-volatile memory storage with high-speed operation and low power consumption.

Packaging/Quantity

The AT27BV010-15JC is typically packaged in reels or tubes, with each containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Memory capacity: 1 Megabit (128K x 8 bits)
• Operating voltage: 2.7V - 5.5V
• Access time: 150 nanoseconds
• Standby current: 100 microamps (typical)
• Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The AT27BV010-15JC has a total of 32 pins, which are assigned specific functions as follows:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. VCC - Power Supply
10. OE - Output Enable
11. CE - Chip Enable
12. WE - Write Enable
13. I/O0 - Data Input/Output
14. I/O1 - Data Input/Output
15. I/O2 - Data Input/Output
16. I/O3 - Data Input/Output
17. I/O4 - Data Input/Output
18. I/O5 - Data Input/Output
19. I/O6 - Data Input/Output
20. I/O7 - Data Input/Output
21. NC - No Connection
22. GND - Ground
23. A8 - Address Input
24. A9 - Address Input
25. A10 - Address Input
26. A11 - Address Input
27. A12 - Address Input
28. A13 - Address Input
29. A14 - Address Input
30. A15 - Address Input
31. NC - No Connection
32. VCC - Power Supply

Functional Features

• Non-volatile storage: The AT27BV010-15JC retains stored data even when power is turned off, making it suitable for applications requiring persistent memory.
• High-speed operation: With an access time of 150 nanoseconds, this IC allows for quick retrieval of stored data.
• Low power consumption: The product is designed to consume minimal power during both active and standby modes, contributing to energy efficiency.
• Wide temperature range: It can operate reliably within a wide temperature range, making it suitable for various environments.

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data retention even in the absence of power.
• High-speed operation enables quick access to stored information.
• Low power consumption contributes to energy efficiency.
• Wide temperature range allows for reliable operation in various environments.

Disadvantages

• Limited memory capacity compared to higher-capacity ICs.
• May not be suitable for applications requiring larger storage capacities.

Working Principles

The AT27BV010-15JC utilizes a combination of electronic circuits and memory cells to store and retrieve digital information. When powered on, the IC enables data access through specific address inputs and control signals. The stored data can be read or written to using appropriate commands and timing sequences.

Detailed Application Field Plans

The AT27BV010-15JC finds application in various electronic devices and systems, including but not limited to: - Consumer electronics: Used in digital cameras, portable media players, and gaming consoles for storing firmware, configuration data, and user data. - Automotive electronics: Employed in automotive control units for storing calibration data, fault codes, and other critical information. - Industrial automation: Utilized in programmable logic controllers (PLCs) and industrial control systems for storing program code and data. - Communication systems: Integrated into networking equipment, routers, and switches for storing firmware and configuration settings.

#