Microchip Technology
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MCP2561FD-E/MF
Переглянути деталі Таблиці даних

MCP2561FD-E/MF

Introduction

The MCP2561FD-E/MF is a high-speed CAN transceiver designed for use in automotive and industrial applications. This device offers reliable communication and robust performance, making it suitable for a wide range of networking and control systems.

Basic Information Overview

  • Category: High-Speed CAN Transceiver
  • Use: Automotive and Industrial Networking
  • Characteristics: High-speed communication, Robust performance
  • Package: SOIC-8, DFN-8
  • Essence: Reliable and efficient communication interface
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature: -40°C to 125°C
  • Data Rate: Up to 8 Mbps
  • ESD Protection: ±8 kV HBM
  • Bus Fault Protection: ±58V
  • Standby Current: 10 µA (typical)

Detailed Pin Configuration

The MCP2561FD-E/MF features an 8-pin configuration with the following pinout: 1. Vio 2. GND 3. TXD 4. RXD 5. S 6. CANL 7. CANH 8. Vdd

Functional Features

  • High-Speed CAN FD Interface
  • Low Power Consumption
  • Bus Fault Protection
  • ESD Protection
  • Wake-up Capability

Advantages and Disadvantages

Advantages: - High-speed data transmission - Robust fault protection - Low standby current - ESD protection

Disadvantages: - Limited to specific networking protocols - May require additional components for full system integration

Working Principles

The MCP2561FD-E/MF operates by providing a high-speed interface for Controller Area Network (CAN) communication. It facilitates the exchange of data between nodes in a network, offering fault protection and low power consumption.

Detailed Application Field Plans

  • Automotive Control Systems
  • Industrial Automation
  • Vehicle Diagnostics
  • Telematics Systems
  • Factory Automation

Detailed and Complete Alternative Models

  • MCP2562FD-E/MF
  • SN65HVD255DR
  • TJA1044GT,118
  • ISO1050DUBR

In conclusion, the MCP2561FD-E/MF is a versatile and reliable high-speed CAN transceiver suitable for demanding automotive and industrial applications. With its robust performance, low power consumption, and advanced features, it serves as a key component in modern networking and control systems.

Word Count: 314

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MCP2561FD-E/MF у технічних рішеннях

  1. What is the maximum data rate of MCP2561FD-E/MF?
    - The maximum data rate of MCP2561FD-E/MF is 8 Mbps.

  2. Can MCP2561FD-E/MF operate in a low-power mode?
    - Yes, MCP2561FD-E/MF can operate in a low-power standby mode to conserve energy.

  3. What is the operating voltage range of MCP2561FD-E/MF?
    - The operating voltage range of MCP2561FD-E/MF is 4.5V to 5.5V.

  4. Does MCP2561FD-E/MF support CAN FD protocol?
    - Yes, MCP2561FD-E/MF supports the CAN FD (Flexible Data-rate) protocol.

  5. Is MCP2561FD-E/MF compatible with automotive applications?
    - Yes, MCP2561FD-E/MF is designed for use in automotive applications and meets AEC-Q100 standards.

  6. What is the typical quiescent current consumption of MCP2561FD-E/MF?
    - The typical quiescent current consumption of MCP2561FD-E/MF is 10 µA.

  7. Can MCP2561FD-E/MF be used in industrial control systems?
    - Yes, MCP2561FD-E/MF is suitable for use in industrial control systems due to its robustness and reliability.

  8. Does MCP2561FD-E/MF have built-in protection features?
    - Yes, MCP2561FD-E/MF includes built-in protection against bus line faults and electrostatic discharge (ESD).

  9. What is the temperature range for MCP2561FD-E/MF?
    - MCP2561FD-E/MF has an extended temperature range of -40°C to 125°C, making it suitable for harsh environments.

  10. Can MCP2561FD-E/MF be used in safety-critical applications?
    - Yes, MCP2561FD-E/MF is suitable for safety-critical applications and complies with ISO 11898-2 and ISO 11898-5 standards.