Microchip Technology
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
SY100ELT22LZC-TR
Переглянути деталі Таблиці даних

SY100ELT22LZC-TR

Product Overview

Category

SY100ELT22LZC-TR belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for signal transmission and processing.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Package

SY100ELT22LZC-TR is available in a small outline package (SOP).

Essence

The essence of this product lies in its ability to provide high-speed signal transmission and processing capabilities in electronic circuits.

Packaging/Quantity

SY100ELT22LZC-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 3.3V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Output Voltage Range: GND to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.5 ns (typical)
  • Output Skew: 200 ps (typical)

Detailed Pin Configuration

SY100ELT22LZC-TR has a total of 8 pins:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. Qn - Complementary output
  4. Q - Output
  5. D - Data input
  6. /EN - Enable input
  7. CLK - Clock input
  8. /RST - Reset input

Functional Features

  • High-speed differential data transmission
  • Differential inputs and outputs for noise immunity
  • On-chip termination resistors for impedance matching
  • Built-in enable and reset functions for easy control

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient signal processing
  • Low power consumption helps in reducing overall energy usage
  • Wide operating voltage range provides flexibility in various applications
  • Small package size saves valuable board space

Disadvantages

  • Requires careful handling due to sensitivity to electrostatic discharge (ESD)
  • Limited availability of alternative models from other manufacturers

Working Principles

SY100ELT22LZC-TR operates based on the principles of differential signaling. It receives differential input signals and processes them to generate corresponding differential output signals. The internal circuitry ensures high-speed operation, low power consumption, and noise immunity.

Detailed Application Field Plans

SY100ELT22LZC-TR finds applications in various fields, including:

  1. Telecommunications: Used in high-speed data transmission systems.
  2. Networking: Employed in network switches and routers for signal processing.
  3. Industrial Automation: Integrated into control systems for precise signal transmission.
  4. Test and Measurement: Utilized in equipment for accurate signal analysis.

Detailed and Complete Alternative Models

While SY100ELT22LZC-TR is a popular choice, there are alternative models available from different manufacturers. Some notable alternatives include:

  1. MC100ELT22: Manufactured by ON Semiconductor.
  2. 74LVTH16245: Produced by Texas Instruments.
  3. SN65LVDS22: Offered by Texas Instruments.

These alternative models provide similar functionality and can be considered as substitutes for SY100ELT22LZC-TR in specific applications.

Word count: 411 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням SY100ELT22LZC-TR у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of SY100ELT22LZC-TR in technical solutions:

  1. Question: What is the purpose of SY100ELT22LZC-TR?
    - Answer: SY100ELT22LZC-TR is a high-speed differential receiver designed for use in various communication and data transmission applications.

  2. Question: What is the operating voltage range of SY100ELT22LZC-TR?
    - Answer: The operating voltage range of SY100ELT22LZC-TR is typically between -4.2V and -5.7V.

  3. Question: Can SY100ELT22LZC-TR be used in low-power applications?
    - Answer: No, SY100ELT22LZC-TR is not suitable for low-power applications as it consumes relatively higher power due to its high-speed operation.

  4. Question: What is the maximum data rate supported by SY100ELT22LZC-TR?
    - Answer: SY100ELT22LZC-TR can support data rates up to 1.5 Gbps, making it suitable for high-speed data transmission applications.

  5. Question: Is SY100ELT22LZC-TR compatible with other logic families?
    - Answer: Yes, SY100ELT22LZC-TR is compatible with various logic families such as ECL, PECL, LVPECL, and CML.

  6. Question: Can SY100ELT22LZC-TR be used in both single-ended and differential signaling applications?
    - Answer: No, SY100ELT22LZC-TR is specifically designed for differential signaling applications and may not perform optimally in single-ended configurations.

  7. Question: What is the typical input voltage swing of SY100ELT22LZC-TR?
    - Answer: The typical input voltage swing of SY100ELT22LZC-TR is around 400 mV, which allows for reliable data reception.

  8. Question: Does SY100ELT22LZC-TR have built-in termination resistors?
    - Answer: No, SY100ELT22LZC-TR does not have built-in termination resistors. External termination resistors may be required depending on the application.

  9. Question: Can SY100ELT22LZC-TR operate in harsh environments?
    - Answer: Yes, SY100ELT22LZC-TR is designed to operate in a wide temperature range and can withstand harsh environmental conditions.

  10. Question: Are there any specific application notes or reference designs available for SY100ELT22LZC-TR?
    - Answer: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement SY100ELT22LZC-TR in their technical solutions effectively.