Monolithic Power Systems Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MP2159AGJ-P
Переглянути деталі Таблиці даних

MP2159AGJ-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Small Package Size, Low Power Consumption
  • Package: SOT-23-6
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 50µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP2159AGJ-P has a total of 6 pins:

  1. VIN: Input Voltage Pin
  2. GND: Ground Pin
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SW: Switching Pin
  6. VOUT: Output Voltage Pin

Functional Features

  • High Efficiency: The MP2159AGJ-P offers high efficiency power conversion, minimizing energy loss.
  • Small Package Size: With its compact SOT-23-6 package, the IC is suitable for space-constrained applications.
  • Low Power Consumption: The quiescent current of 50µA ensures minimal power consumption during standby.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Compact package size
  • Low power consumption
  • Wide input and output voltage range
  • Suitable for various applications

Disadvantages

  • Limited maximum output current (1.5A)

Working Principles

The MP2159AGJ-P is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.3V. It achieves this through a high-frequency switching process, which allows for efficient power conversion. The IC utilizes an internal feedback mechanism to maintain a stable output voltage despite changes in input voltage or load conditions.

Detailed Application Field Plans

The MP2159AGJ-P is commonly used in various applications, including:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT (Internet of Things) devices
  4. Wearable technology
  5. Low-power embedded systems

Detailed and Complete Alternative Models

  • MP2159AGJ: Similar specifications and features, but with a different package (SOT-89-5)
  • MP2159AGJ-R: RoHS-compliant version of MP2159AGJ-P with the same specifications and features

Note: Please refer to the manufacturer's datasheet for a comprehensive list of alternative models.

This entry provides an overview of the MP2159AGJ-P, including its product category, use, characteristics, package, essence, packaging/quantity information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MP2159AGJ-P у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MP2159AGJ-P in technical solutions:

  1. Q: What is the MP2159AGJ-P? A: The MP2159AGJ-P is a specific model of power management integrated circuit (PMIC) used for voltage regulation in various electronic devices.

  2. Q: What are the key features of the MP2159AGJ-P? A: The MP2159AGJ-P offers high efficiency, low quiescent current, wide input voltage range, adjustable output voltage, and overcurrent/overtemperature protection.

  3. Q: What is the typical input voltage range for the MP2159AGJ-P? A: The MP2159AGJ-P typically operates with an input voltage range of 2.7V to 5.5V.

  4. Q: Can the MP2159AGJ-P be used in battery-powered applications? A: Yes, the MP2159AGJ-P is suitable for battery-powered applications due to its low quiescent current and efficient power conversion capabilities.

  5. Q: How much output current can the MP2159AGJ-P handle? A: The MP2159AGJ-P can handle a maximum output current of up to 1.5A.

  6. Q: Is the output voltage of the MP2159AGJ-P fixed or adjustable? A: The output voltage of the MP2159AGJ-P is adjustable, allowing for flexibility in different applications.

  7. Q: Does the MP2159AGJ-P have any built-in protection features? A: Yes, the MP2159AGJ-P includes overcurrent protection and overtemperature protection to safeguard against potential issues.

  8. Q: What type of package does the MP2159AGJ-P come in? A: The MP2159AGJ-P is available in a compact and thermally enhanced QFN package.

  9. Q: Can the MP2159AGJ-P be used in automotive applications? A: Yes, the MP2159AGJ-P is suitable for automotive applications as it meets the necessary requirements for such environments.

  10. Q: Are there any application notes or reference designs available for the MP2159AGJ-P? A: Yes, the manufacturer provides application notes and reference designs to assist with the implementation of the MP2159AGJ-P in various technical solutions.

Please note that the specific details may vary depending on the manufacturer's documentation and the application requirements.