Monolithic Power Systems Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MP24895GQ-P
Переглянути деталі Таблиці даних

MP24895GQ-P

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: QFN-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP24895GQ-P has a total of 16 pins. Here is the detailed pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TR: Soft-Start/Tracking Pin
  6. PGND: Power Ground
  7. SW: Switch Node
  8. SW: Switch Node
  9. SW: Switch Node
  10. SW: Switch Node
  11. VCC: Supply Voltage
  12. VCC: Supply Voltage
  13. VCC: Supply Voltage
  14. VCC: Supply Voltage
  15. VOUT: Output Voltage
  16. VOUT: Output Voltage

Functional Features

  • High Efficiency: The MP24895GQ-P offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: It consumes low power during operation, reducing overall power consumption.
  • Wide Input Voltage Range: It can accept input voltages ranging from 4.5V to 18V, providing flexibility in various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.8V to 5.5V, allowing customization based on specific requirements.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Wide input voltage range - Adjustable output voltage - Overcurrent protection

Disadvantages: - Limited maximum output current (3A)

Working Principles

The MP24895GQ-P is a voltage regulator that utilizes a switching regulator topology. It converts the input voltage to a regulated output voltage by rapidly switching the input voltage across an inductor and then filtering it to obtain a stable output. The switching frequency of 500kHz ensures efficient power conversion.

Detailed Application Field Plans

The MP24895GQ-P finds applications in various fields, including but not limited to: 1. Industrial Automation 2. Automotive Electronics 3. Telecommunications 4. Consumer Electronics 5. Power Supplies

Detailed and Complete Alternative Models

Here are some alternative models that can be considered as alternatives to the MP24895GQ-P:

  1. MP24896GQ-P: Similar specifications and features, but with higher maximum output current (5A).
  2. MP24894GQ-P: Similar specifications and features, but with lower maximum output current (2A).
  3. MP24900GQ-P: Similar specifications and features, but with adjustable output voltage up to 12V.

These alternative models provide options based on specific requirements and desired performance characteristics.

Word count: 305 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MP24895GQ-P у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MP24895GQ-P in technical solutions:

  1. Question: What is the MP24895GQ-P?
    Answer: The MP24895GQ-P is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Question: What are the key features of the MP24895GQ-P?
    Answer: The MP24895GQ-P features multiple voltage regulators, current limit protection, thermal shutdown, and a wide input voltage range.

  3. Question: What is the input voltage range supported by the MP24895GQ-P?
    Answer: The MP24895GQ-P supports an input voltage range of 4.5V to 18V.

  4. Question: How many voltage regulators are included in the MP24895GQ-P?
    Answer: The MP24895GQ-P includes four synchronous buck converters and one low-dropout (LDO) regulator.

  5. Question: What is the maximum output current of the MP24895GQ-P?
    Answer: The maximum output current varies depending on the specific voltage regulator, but it can go up to 3A.

  6. Question: Can the MP24895GQ-P be used in battery-powered applications?
    Answer: Yes, the MP24895GQ-P is suitable for battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  7. Question: Does the MP24895GQ-P have any built-in protection features?
    Answer: Yes, the MP24895GQ-P includes overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  8. Question: Is the MP24895GQ-P easy to integrate into existing designs?
    Answer: Yes, the MP24895GQ-P is available in a compact package and offers a wide range of features, making it relatively easy to integrate into existing designs.

  9. Question: Can the MP24895GQ-P be used in automotive applications?
    Answer: Yes, the MP24895GQ-P is AEC-Q100 qualified, making it suitable for use in automotive applications.

  10. Question: Are there any evaluation boards or reference designs available for the MP24895GQ-P?
    Answer: Yes, Monolithic Power Systems provides evaluation boards and reference designs that can help users quickly prototype and implement the MP24895GQ-P in their technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.