Monolithic Power Systems Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MP2492DQ-LF-P
Переглянути деталі Таблиці даних

MP2492DQ-LF-P

Introduction

The MP2492DQ-LF-P is a voltage regulator belonging to the category of integrated circuits. This device is commonly used in electronic devices to regulate voltage and ensure stable power supply to various components. The MP2492DQ-LF-P possesses specific characteristics, packaging, and quantity that make it suitable for a wide range of applications.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, compact size
  • Package: DFN-10 (3x3)
  • Essence: Stable voltage regulation
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 16V
  • Maximum Output Current: 3A
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MP2492DQ-LF-P features a DFN-10 package with the following pin configuration: 1. VIN (Input Voltage) 2. PGND (Power Ground) 3. SW (Switch Node) 4. FB (Feedback) 5. EN (Enable) 6. SS/TRK (Soft Start/Tracking) 7. COMP (Compensation) 8. VOUT (Output Voltage) 9. AGND (Analog Ground) 10. BST (Bootstrap)

Functional Features

  • High Efficiency: The MP2492DQ-LF-P offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: It maintains a low dropout voltage, ensuring efficient power delivery even when the input voltage is close to the output voltage.
  • Compact Size: Its small form factor makes it suitable for space-constrained applications.

Advantages and Disadvantages

Advantages: - Efficient voltage regulation - Low dropout voltage - Compact size

Disadvantages: - Limited maximum output current compared to some alternatives - May require additional external components for specific applications

Working Principles

The MP2492DQ-LF-P operates by comparing the actual output voltage with a reference voltage and adjusting the output to maintain a stable voltage level. It utilizes a feedback loop to continuously monitor and regulate the output voltage, ensuring consistent power supply to connected devices.

Detailed Application Field Plans

The MP2492DQ-LF-P is well-suited for a variety of applications including: - Portable electronic devices - Battery-powered systems - Industrial automation equipment - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to the MP2492DQ-LF-P include: - LM317: A popular linear voltage regulator with adjustable output - LT1083: A high-current positive voltage regulator - LM7805: A widely used fixed-output voltage regulator

In conclusion, the MP2492DQ-LF-P is a versatile voltage regulator with high efficiency and compact design, making it suitable for diverse electronic applications.

Word Count: 443

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MP2492DQ-LF-P у технічних рішеннях

Sure, here are 10 common questions and answers related to the application of MP2492DQ-LF-P in technical solutions:

  1. What is the input voltage range for MP2492DQ-LF-P?

    • The input voltage range for MP2492DQ-LF-P is 4.5V to 75V.

  2. What is the typical output current of MP2492DQ-LF-P?

    • The typical output current of MP2492DQ-LF-P is 3A.

  3. What is the switching frequency of MP2492DQ-LF-P?

    • The switching frequency of MP2492DQ-LF-P is typically 300kHz.

  4. Can MP2492DQ-LF-P be used in automotive applications?

    • Yes, MP2492DQ-LF-P is suitable for automotive applications.

  5. What type of protection features does MP2492DQ-LF-P offer?

    • MP2492DQ-LF-P offers overcurrent protection, thermal shutdown, and input undervoltage lockout.

  6. Is MP2492DQ-LF-P suitable for battery charging applications?

    • Yes, MP2492DQ-LF-P can be used in battery charging applications.

  7. What is the operating temperature range for MP2492DQ-LF-P?

    • The operating temperature range for MP2492DQ-LF-P is -40°C to 125°C.

  8. Does MP2492DQ-LF-P require an external compensation network?

    • No, MP2492DQ-LF-P has an internal compensation network.

  9. Can MP2492DQ-LF-P be used in industrial control systems?

    • Yes, MP2492DQ-LF-P is suitable for use in industrial control systems.

  10. What package type is MP2492DQ-LF-P available in?

    • MP2492DQ-LF-P is available in a 16-pin QFN package.

These questions and answers cover various aspects of the application of MP2492DQ-LF-P in technical solutions. If you have more specific questions, feel free to ask!