Деталі продукту див. у специфікаціях.
HEF4060BTTJ
Product Overview
Category
HEF4060BTTJ belongs to the category of integrated circuits (ICs).
Use
It is commonly used as a binary ripple counter and oscillator in various electronic applications.
Characteristics
- High-speed operation
- Low power consumption
- Wide supply voltage range
- Schmitt-trigger action on all inputs
- Buffered outputs
- Capable of driving two low-power TTL loads or one low-power Schottky TTL load over the full operating temperature range
Package
HEF4060BTTJ is available in a 16-pin SO package.
Essence
The essence of HEF4060BTTJ lies in its ability to count binary signals and generate accurate clock pulses for timing purposes.
Packaging/Quantity
HEF4060BTTJ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Supply voltage: 3V to 15V
- Operating temperature range: -40°C to +125°C
- Maximum clock frequency: 10 MHz
- Number of stages: 14
- Output current: ±5.2 mA
Detailed Pin Configuration
- Clock input (CP)
- Reset input (MR)
- Data input (D)
- Enable input (EN)
- Output Q12
- Output Q13
- Output Q14
- Ground (GND)
- Output Q11
- Output Q10
- Output Q9
- Output Q8
- Output Q7
- Output Q6
- VDD (Supply voltage)
- Output Q5
Functional Features
- Binary ripple counter with an internal oscillator
- Can be used as a frequency divider
- Provides 14-stage binary counter outputs
- Reset function for synchronization purposes
- Schmitt-trigger action ensures noise immunity
Advantages and Disadvantages
Advantages
- High-speed operation allows for efficient counting and timing applications
- Low power consumption makes it suitable for battery-powered devices
- Wide supply voltage range provides flexibility in various electronic systems
- Buffered outputs enable driving of multiple loads
- Schmitt-trigger action on all inputs enhances noise immunity
Disadvantages
- Limited maximum clock frequency may not be suitable for high-frequency applications
- 14-stage counter may not be sufficient for complex counting requirements
Working Principles
HEF4060BTTJ operates as a binary ripple counter and oscillator. The internal oscillator generates clock pulses, which are then used to increment the counter. The counter outputs represent the binary count of the input clock signals. The reset input allows for synchronization and resetting of the counter.
Detailed Application Field Plans
HEF4060BTTJ finds applications in various fields, including: 1. Digital frequency division 2. Timing circuits 3. Clock generation 4. Industrial automation 5. Consumer electronics 6. Communication systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to HEF4060BTTJ are: 1. CD4060BE 2. MC14060B 3. HCF4060BE 4. TC74HC4060AF
These models offer similar functionality and can be used as replacements based on specific requirements.
Word count: 511 words
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням HEF4060BTTJ у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of HEF4060BTTJ in technical solutions:
Q: What is HEF4060BTTJ? A: HEF4060BTTJ is a high-speed CMOS ripple-carry binary counter/divider integrated circuit (IC) that can be used in various technical solutions.
Q: What are the main features of HEF4060BTTJ? A: The main features of HEF4060BTTJ include a wide supply voltage range, high-speed operation, low power consumption, and a built-in oscillator.
Q: How does HEF4060BTTJ work as a counter? A: HEF4060BTTJ works as a counter by incrementing its output on each clock cycle, allowing it to count up to a certain value based on the external components connected to it.
Q: Can HEF4060BTTJ be used as a frequency divider? A: Yes, HEF4060BTTJ can be used as a frequency divider by connecting the input signal to the appropriate pin and selecting the desired division ratio using external components.
Q: What is the maximum clock frequency supported by HEF4060BTTJ? A: The maximum clock frequency supported by HEF4060BTTJ is typically around 15 MHz, but it may vary depending on the specific operating conditions.
Q: How many outputs does HEF4060BTTJ have? A: HEF4060BTTJ has a total of 14 outputs, which can be used for various purposes such as driving LEDs, controlling other ICs, or providing status signals.
Q: Can HEF4060BTTJ be cascaded to increase the counting range? A: Yes, HEF4060BTTJ can be cascaded with additional counters to increase the counting range by connecting the carry output of one counter to the clock input of the next.
Q: What is the power supply voltage range for HEF4060BTTJ? A: The power supply voltage range for HEF4060BTTJ is typically between 3V and 15V, making it compatible with a wide range of applications.
Q: Is HEF4060BTTJ suitable for battery-powered devices? A: Yes, HEF4060BTTJ is suitable for battery-powered devices due to its low power consumption, which helps in extending the battery life.
Q: Are there any application notes or reference designs available for HEF4060BTTJ? A: Yes, the manufacturer of HEF4060BTTJ provides application notes and reference designs that can help users understand and implement the IC in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for detailed information.