Nexperia USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
PDTC115TU,115
Переглянути деталі Таблиці даних

PDTC115TU,115

Product Category: Integrated Circuit

Basic Information Overview: - Category: Voltage Regulator - Use: Regulating voltage in electronic circuits - Characteristics: High precision, low dropout voltage, low quiescent current - Package: SOT-23 - Essence: Regulates input voltage to a stable output voltage - Packaging/Quantity: Tape & Reel (3000 units per reel)

Specifications: - Input Voltage Range: 2.5V to 16V - Output Voltage Range: 1.2V to 15V - Dropout Voltage: 250mV at 100mA - Quiescent Current: 75µA - Load Regulation: 0.05% typical - Line Regulation: 0.03% typical

Detailed Pin Configuration: - Pin 1: VIN (Input Voltage) - Pin 2: GND (Ground) - Pin 3: VOUT (Output Voltage)

Functional Features: - Overcurrent and Thermal Protection - Low Noise - Fast Transient Response

Advantages: - Wide input voltage range - Low dropout voltage - Excellent load and line regulation

Disadvantages: - Limited maximum output current - Sensitive to external noise

Working Principles: The PDTC115TU,115 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage.

Detailed Application Field Plans: - Battery-powered devices - Portable electronics - Sensor modules

Detailed and Complete Alternative Models: - LM1117 - MCP1702 - XC6206

This integrated circuit is widely used in various applications due to its high precision and low dropout voltage, making it suitable for battery-powered and portable electronic devices.

[Word Count: 258]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням PDTC115TU,115 у технічних рішеннях

  1. What is PDTC115TU,115?

    • PDTC115TU,115 is a NPN resistor-equipped transistor (RET) in a SOT457 small Surface-Mounted Device (SMD) plastic package.

  2. What are the typical applications of PDTC115TU,115?

    • PDTC115TU,115 is commonly used in general-purpose switching and amplification applications.

  3. What is the maximum collector current for PDTC115TU,115?

    • The maximum collector current for PDTC115TU,115 is 100 mA.

  4. What is the voltage rating for PDTC115TU,115?

    • The voltage rating for PDTC115TU,115 is 50 V.

  5. What is the power dissipation of PDTC115TU,115?

    • The power dissipation of PDTC115TU,115 is 200 mW.

  6. What are the key features of PDTC115TU,115?

    • Some key features of PDTC115TU,115 include its small SMD plastic package, NPN resistor-equipped transistor, and high current gain.

  7. What are the recommended operating conditions for PDTC115TU,115?

    • The recommended operating conditions for PDTC115TU,115 include a collector current of 10 mA to 100 mA and a collector-emitter voltage of 45 V.

  8. Can PDTC115TU,115 be used for low-power amplification?

    • Yes, PDTC115TU,115 can be used for low-power amplification due to its high current gain and power dissipation capabilities.

  9. Is PDTC115TU,115 suitable for battery-operated devices?

    • Yes, PDTC115TU,115 is suitable for battery-operated devices due to its low power dissipation and voltage rating.

  10. Are there any specific layout considerations when using PDTC115TU,115 in a circuit?

    • It is important to ensure proper heat dissipation and minimize parasitic capacitance when laying out a circuit using PDTC115TU,115. Additionally, attention should be paid to the recommended operating conditions to ensure optimal performance.