Nexperia USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
PHK13N03LT,518
Переглянути деталі Таблиці даних

PHK13N03LT,518

Product Overview

  • Category: Power MOSFET
  • Use: Switching applications in power supplies, motor control, and other high-current circuits
  • Characteristics: Low on-state resistance, high switching speed, low gate charge
  • Package: TO-252 (DPAK)
  • Essence: Efficient power switching
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Voltage Rating: 30V
  • Current Rating: 13A
  • On-State Resistance: 13mΩ
  • Gate Charge: 15nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Fast switching speed
  • Low power dissipation
  • High efficiency

Advantages

  • Low on-state resistance
  • High current-carrying capability
  • Suitable for high-frequency applications

Disadvantages

  • Sensitivity to overvoltage conditions
  • Limited voltage rating compared to some alternatives

Working Principles

The PHK13N03LT,518 operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.

Detailed Application Field Plans

This MOSFET is suitable for use in various applications including: - Power supplies - Motor control - DC-DC converters - Inverters

Detailed and Complete Alternative Models

  • PHK13NQ03LT,518: Similar specifications with a lower on-state resistance
  • PHK16N03LT,518: Higher voltage rating and current capability

Note: The above information is for reference purposes only. Always refer to the datasheet for the most accurate and up-to-date details.

Word count: 298

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням PHK13N03LT,518 у технічних рішеннях

Sure, here are 10 common questions and answers related to the application of PHK13N03LT,518 in technical solutions:

  1. What is PHK13N03LT,518?

    • PHK13N03LT,518 is a power MOSFET transistor designed for use in various electronic applications.

  2. What is the maximum voltage rating for PHK13N03LT,518?

    • The maximum voltage rating for PHK13N03LT,518 is typically around 30V.

  3. What is the maximum current rating for PHK13N03LT,518?

    • The maximum continuous drain current rating for PHK13N03LT,518 is typically around 13A.

  4. What are the typical applications for PHK13N03LT,518?

    • PHK13N03LT,518 is commonly used in power management, motor control, and other high-current switching applications.

  5. What is the on-resistance (RDS(on)) of PHK13N03LT,518?

    • The on-resistance of PHK13N03LT,518 is typically very low, around 8 milliohms.

  6. Is PHK13N03LT,518 suitable for automotive applications?

    • Yes, PHK13N03LT,518 is often used in automotive systems due to its high current handling capabilities.

  7. Can PHK13N03LT,518 be used in high-frequency switching applications?

    • While it's not specifically designed for high-frequency applications, PHK13N03LT,518 can still be used in moderate frequency switching applications.

  8. What is the thermal resistance of PHK13N03LT,518?

    • The thermal resistance of PHK13N03LT,518 is typically around 40°C/W, which indicates its ability to dissipate heat.

  9. Does PHK13N03LT,518 require a heatsink for operation?

    • It depends on the specific application and the amount of power dissipation, but in many cases, a heatsink may be necessary for optimal performance.

  10. Are there any recommended driver circuits for PHK13N03LT,518?

    • Various driver circuits can be used with PHK13N03LT,518, and the choice depends on the specific application requirements and operating conditions.

I hope these questions and answers provide helpful information about the application of PHK13N03LT,518 in technical solutions. Let me know if you need further assistance!