NXP USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MC68HC908QT1CP
Переглянути деталі Таблиці даних

MC68HC908QT1CP

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: Low power consumption, high performance, small package size
  • Package: 20-pin PDIP (Plastic Dual In-line Package)
  • Essence: A microcontroller designed for control applications with low power requirements
  • Packaging/Quantity: Available in tubes or reels, quantity depends on supplier

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 8 MHz
  • Program Memory Size: 1 KB Flash
  • RAM Size: 64 Bytes
  • Input/Output Pins: 16
  • Timers: 2
  • Communication Interfaces: SPI, I2C, UART
  • Operating Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MC68HC908QT1CP has a total of 20 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PTA0 - General-purpose input/output pin
  3. PTA1 - General-purpose input/output pin
  4. PTA2 - General-purpose input/output pin
  5. PTA3 - General-purpose input/output pin
  6. PTA4 - General-purpose input/output pin
  7. PTA5 - General-purpose input/output pin
  8. RESET - Reset pin
  9. IRQ - Interrupt request pin
  10. VSS - Ground
  11. PTB0 - General-purpose input/output pin
  12. PTB1 - General-purpose input/output pin
  13. PTB2 - General-purpose input/output pin
  14. PTB3 - General-purpose input/output pin
  15. PTB4 - General-purpose input/output pin
  16. PTB5 - General-purpose input/output pin
  17. VDD - Power supply voltage
  18. PTB6 - General-purpose input/output pin
  19. PTB7 - General-purpose input/output pin
  20. VSS - Ground

Functional Features

  • Low power consumption allows for battery-powered applications
  • High performance enables efficient control and processing of data
  • Small package size makes it suitable for space-constrained designs
  • Built-in communication interfaces (SPI, I2C, UART) facilitate connectivity with other devices
  • Two timers provide timing and synchronization capabilities

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life - High performance enables fast and efficient control operations - Small package size saves board space in compact designs - Built-in communication interfaces simplify device integration

Disadvantages: - Limited program memory size may restrict the complexity of applications - Limited RAM size may limit the amount of data that can be processed simultaneously - Limited number of input/output pins may require additional circuitry for larger projects

Working Principles

The MC68HC908QT1CP operates based on an 8-bit architecture. It executes instructions stored in its program memory to perform various control tasks. The microcontroller communicates with external devices through its input/output pins and built-in communication interfaces. It utilizes timers for precise timing and synchronization.

Detailed Application Field Plans

The MC68HC908QT1CP is commonly used in the following application fields:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Consumer electronics
  5. Medical devices

Alternative Models

Some alternative models to the MC68HC908QT1CP include:

  1. ATmega328P by Atmel
  2. PIC16F877A by Microchip
  3. STM32F103C8T6 by STMicroelectronics
  4. MSP430G2553 by Texas Instruments

These alternative models offer similar functionalities and can be considered as replacements depending on specific project requirements.

Word count: 350 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MC68HC908QT1CP у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MC68HC908QT1CP in technical solutions:

Q1: What is MC68HC908QT1CP? A1: MC68HC908QT1CP is a microcontroller from the HC08 family, designed for embedded systems applications.

Q2: What are the key features of MC68HC908QT1CP? A2: Some key features include an 8-bit CPU, flash memory, RAM, multiple I/O ports, timers, and analog-to-digital converters.

Q3: What are the typical applications of MC68HC908QT1CP? A3: MC68HC908QT1CP is commonly used in automotive electronics, industrial control systems, consumer electronics, and other embedded applications.

Q4: How much flash memory does MC68HC908QT1CP have? A4: MC68HC908QT1CP has 1 kilobyte (KB) of flash memory for program storage.

Q5: Can MC68HC908QT1CP be programmed in C or assembly language? A5: Yes, MC68HC908QT1CP can be programmed using both C and assembly language.

Q6: Does MC68HC908QT1CP support analog-to-digital conversion? A6: Yes, MC68HC908QT1CP has built-in analog-to-digital converters (ADCs) for reading analog signals.

Q7: How many I/O ports does MC68HC908QT1CP have? A7: MC68HC908QT1CP has a total of 16 general-purpose I/O ports.

Q8: What is the operating voltage range of MC68HC908QT1CP? A8: MC68HC908QT1CP operates within a voltage range of 2.7V to 5.5V.

Q9: Can MC68HC908QT1CP communicate with other devices? A9: Yes, MC68HC908QT1CP supports serial communication protocols such as UART and SPI for interfacing with other devices.

Q10: Is MC68HC908QT1CP suitable for battery-powered applications? A10: Yes, MC68HC908QT1CP is designed to be power-efficient and can be used in battery-powered applications.

Please note that these questions and answers are general and may vary depending on specific application requirements and technical details.