NXP USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MM908E624AYPEW
Переглянути деталі Таблиці даних

MM908E624AYPEW

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Automotive Electronics
  • Characteristics: Microcontroller, Low Power Consumption, High Performance
  • Package: Plastic Encapsulated, 64-pin
  • Essence: Control and Monitoring of Automotive Systems
  • Packaging/Quantity: Tray, 250 units per tray

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 16 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +125°C
  • Communication Interfaces: LIN, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 8 channels
  • Timers: 16-bit, 4 channels
  • PWM Outputs: 6 channels
  • Watchdog Timer: Yes
  • Supply Current: 3 mA (typical)

Detailed Pin Configuration

The MM908E624AYPEW has a total of 64 pins. The pin configuration is as follows:

  1. VDDA - Analog Power Supply
  2. VSSA - Analog Ground
  3. RESET - Reset Input
  4. IRQ - Interrupt Request Output
  5. XTAL1 - Crystal Oscillator Input
  6. XTAL2 - Crystal Oscillator Output
  7. VDD - Digital Power Supply
  8. VSS - Digital Ground
  9. PTA0 - General Purpose I/O
  10. PTA1 - General Purpose I/O
  11. PTA2 - General Purpose I/O
  12. PTA3 - General Purpose I/O
  13. PTA4 - General Purpose I/O
  14. PTA5 - General Purpose I/O
  15. PTA6 - General Purpose I/O
  16. PTA7 - General Purpose I/O
  17. PTB0 - General Purpose I/O
  18. PTB1 - General Purpose I/O
  19. PTB2 - General Purpose I/O
  20. PTB3 - General Purpose I/O
  21. PTB4 - General Purpose I/O
  22. PTB5 - General Purpose I/O
  23. PTB6 - General Purpose I/O
  24. PTB7 - General Purpose I/O
  25. PTC0 - General Purpose I/O
  26. PTC1 - General Purpose I/O
  27. PTC2 - General Purpose I/O
  28. PTC3 - General Purpose I/O
  29. PTC4 - General Purpose I/O
  30. PTC5 - General Purpose I/O
  31. PTC6 - General Purpose I/O
  32. PTC7 - General Purpose I/O
  33. PTD0 - General Purpose I/O
  34. PTD1 - General Purpose I/O
  35. PTD2 - General Purpose I/O
  36. PTD3 - General Purpose I/O
  37. PTD4 - General Purpose I/O
  38. PTD5 - General Purpose I/O
  39. PTD6 - General Purpose I/O
  40. PTD7 - General Purpose I/O
  41. VDDPLL - PLL Power Supply
  42. VSSPLL - PLL Ground
  43. PLLIN - PLL Input
  44. PLLOUT - PLL Output
  45. VDDLIN - LIN Power Supply
  46. VSSLIN - LIN Ground
  47. LINRXD - LIN Receiver Input
  48. LINTXD - LIN Transmitter Output
  49. VDDSPI - SPI Power Supply
  50. VSSSPI - SPI Ground
  51. SPIMISO - SPI Master In Slave Out
  52. SPIMOSI - SPI Master Out Slave In
  53. SPICLK - SPI Clock
  54. SPICS - SPI Chip Select
  55. VDDI2C - I2C Power Supply
  56. VSSI2C - I2C Ground
  57. I2CSCL - I2C Serial Clock
  58. I2CSDA - I2C Serial Data
  59. VDDADC - ADC Power Supply
  60. VSSADC - ADC Ground
  61. AD0 - Analog Input 0
  62. AD1 - Analog Input 1
  63. AD2 - Analog Input 2
  64. AD3 - Analog Input 3

Functional Features

  • Control and monitoring of various automotive systems
  • Integrated LIN, SPI, and I2C communication interfaces for easy connectivity
  • High-performance 8-bit microcontroller architecture
  • Low power consumption for efficient operation
  • Built-in analog-to-digital converter (ADC) for accurate sensor readings
  • Multiple timers and PWM outputs for precise timing control
  • Reset and interrupt capabilities for system reliability
  • Wide operating voltage and temperature range for

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MM908E624AYPEW у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of MM908E624AYPEW in technical solutions:

  1. Q: What is MM908E624AYPEW? A: MM908E624AYPEW is a microcontroller unit (MCU) developed by NXP Semiconductors, specifically designed for automotive applications.

  2. Q: What are the key features of MM908E624AYPEW? A: Some key features of MM908E624AYPEW include an ARM Cortex-M0+ core, integrated LIN transceiver, EEPROM memory, and various analog and digital peripherals.

  3. Q: What is the purpose of using MM908E624AYPEW in technical solutions? A: MM908E624AYPEW is commonly used in automotive applications for tasks such as body control modules, lighting control, seat control, and other similar functions.

  4. Q: Can MM908E624AYPEW be used in non-automotive applications? A: While MM908E624AYPEW is primarily designed for automotive use, it can also be utilized in other industrial applications that require similar functionalities.

  5. Q: How does MM908E624AYPEW communicate with other devices? A: MM908E624AYPEW supports various communication protocols such as LIN (Local Interconnect Network), SPI (Serial Peripheral Interface), and I2C (Inter-Integrated Circuit).

  6. Q: What programming language is used to program MM908E624AYPEW? A: MM908E624AYPEW can be programmed using C or C++ programming languages, along with the appropriate development tools provided by NXP.

  7. Q: Is there any development kit available for MM908E624AYPEW? A: Yes, NXP offers a development kit called "MM908E624AYPEW Evaluation Board" that provides a platform for prototyping and testing applications using this MCU.

  8. Q: Can MM908E624AYPEW handle real-time tasks? A: Yes, MM908E624AYPEW is capable of handling real-time tasks due to its efficient ARM Cortex-M0+ core and integrated peripherals.

  9. Q: Are there any limitations or considerations when using MM908E624AYPEW? A: Some considerations include power supply requirements, temperature range, and the need for external components such as voltage regulators and crystal oscillators.

  10. Q: Where can I find more information about MM908E624AYPEW? A: You can find detailed information about MM908E624AYPEW on the official NXP website, including datasheets, application notes, and user manuals.

Please note that these answers are general and may vary depending on specific use cases and requirements.