NXP USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
MMA6856AKGCWR2

MMA6856AKGCWR2

Product Overview

The MMA6856AKGCWR2 belongs to the category of accelerometers and is designed for use in various electronic devices. This accelerometer is known for its high precision, compact size, and low power consumption. It comes in a small package and is essential for measuring acceleration in different applications.

Basic Information

  • Category: Accelerometer
  • Use: Measuring acceleration in electronic devices
  • Characteristics: High precision, compact size, low power consumption
  • Package: Small form factor
  • Essence: Accurate measurement of acceleration
  • Packaging/Quantity: Varies based on supplier

Specifications

  • Operating Voltage: 1.8V - 3.6V
  • Sensitivity: 800 mV/g
  • Output Type: Analog
  • Operating Temperature Range: -40°C to +85°C
  • Dimensions: 3mm x 3mm x 1mm

Detailed Pin Configuration

The MMA6856AKGCWR2 features a standard pin configuration with connections for power, ground, and analog output. The detailed pinout is as follows: 1. VCC (Power) 2. GND (Ground) 3. OUT (Analog Output)

Functional Features

  • High precision measurement of acceleration
  • Low power consumption for extended battery life
  • Compact size for easy integration into electronic devices
  • Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages

  • High precision measurements
  • Low power consumption
  • Compact size

Disadvantages

  • Limited operating temperature range
  • Analog output may require additional signal conditioning

Working Principles

The MMA6856AKGCWR2 operates based on the principle of capacitive sensing. When subjected to acceleration, the mass within the accelerometer causes a change in capacitance, which is then converted into an analog voltage proportional to the applied force.

Detailed Application Field Plans

The MMA6856AKGCWR2 finds extensive use in various applications, including: - Motion tracking in wearable devices - Vibration monitoring in industrial equipment - Impact detection in automotive safety systems - Orientation sensing in consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MMA6856AKGCWR2 include: - ADXL345 - LIS3DH - MPU-6050 - KX022

In conclusion, the MMA6856AKGCWR2 accelerometer offers high precision and compact design, making it suitable for diverse applications in the electronics industry.

[Word Count: 398]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням MMA6856AKGCWR2 у технічних рішеннях

  1. What is the MMA6856AKGCWR2 accelerometer used for?

    • The MMA6856AKGCWR2 accelerometer is commonly used for measuring acceleration and tilt in various technical solutions.

  2. What is the operating voltage range of the MMA6856AKGCWR2?

    • The operating voltage range of the MMA6856AKGCWR2 is typically between 2.2V and 3.6V.

  3. What is the output format of the MMA6856AKGCWR2 accelerometer?

    • The MMA6856AKGCWR2 typically provides digital output in either I2C or SPI format.

  4. What is the sensitivity range of the MMA6856AKGCWR2?

    • The sensitivity range of the MMA6856AKGCWR2 can vary, but it is commonly available in ranges such as ±2g, ±4g, and ±8g.

  5. Can the MMA6856AKGCWR2 be used for vibration monitoring?

    • Yes, the MMA6856AKGCWR2 can be used for vibration monitoring applications due to its ability to measure acceleration.

  6. Is the MMA6856AKGCWR2 suitable for automotive applications?

    • Yes, the MMA6856AKGCWR2 is often used in automotive applications for tasks such as airbag deployment and electronic stability control.

  7. What are the typical dimensions of the MMA6856AKGCWR2 package?

    • The MMA6856AKGCWR2 is commonly available in a small package, with typical dimensions around 3mm x 3mm.

  8. Does the MMA6856AKGCWR2 have built-in motion detection features?

    • Yes, some versions of the MMA6856AKGCWR2 include built-in motion detection capabilities, making it suitable for applications such as screen rotation in mobile devices.

  9. Can the MMA6856AKGCWR2 be used in industrial machinery monitoring?

    • Yes, the MMA6856AKGCWR2 can be utilized in industrial machinery monitoring to detect vibrations and changes in orientation.

  10. What are the common temperature ranges for the operation of the MMA6856AKGCWR2?

    • The MMA6856AKGCWR2 is typically designed to operate within a temperature range of -40°C to 85°C, making it suitable for various environmental conditions.