ON Semiconductor
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
ESD5B5.0ST5G
Переглянути деталі Таблиці даних

ESD5B5.0ST5G

Introduction

The ESD5B5.0ST5G belongs to the category of transient voltage suppressor (TVS) diodes and is designed to protect sensitive electronics from voltage transients induced by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. This entry provides a comprehensive overview of the ESD5B5.0ST5G, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage transients induced by ESD, EFT, and lightning
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SOD-523
  • Essence: Silicon TVS Diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Reverse Standoff (Typ): 5V
  • Voltage - Breakdown (Min): 6.4V
  • Voltage - Clamping (Max) @ Ipp: 9.2V
  • Current - Peak Pulse (10/1000µs): 3A
  • Power - Peak Pulse: 15W
  • Operating Temperature: -55°C ~ 150°C

Detailed Pin Configuration

The ESD5B5.0ST5G has two pins: 1. Anode 2. Cathode

Functional Features

  • Fast response to transient voltage events
  • Low clamping voltage to protect downstream components
  • High surge current capability for robust protection

Advantages and Disadvantages

Advantages

  • Effective protection against ESD, EFT, and lightning-induced transients
  • Compact SOD-523 package for space-constrained applications
  • Wide operating temperature range for diverse environments

Disadvantages

  • Limited to low voltage applications
  • Requires careful PCB layout for optimal performance

Working Principles

The ESD5B5.0ST5G operates by diverting transient currents away from sensitive circuitry, thereby limiting the voltage across the protected device during transient events. This is achieved through the rapid conduction of the TVS diode when the voltage exceeds its breakdown voltage, effectively shunting the transient energy to ground.

Detailed Application Field Plans

The ESD5B5.0ST5G is widely used in various electronic systems, including but not limited to: - Consumer electronics - Telecommunication equipment - Industrial control systems - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the ESD5B5.0ST5G include: - ESD5Z5.0T1G - ESD5V0S1B-02LRH - ESD5V0S1B-02LSRH - ESD5V0S1B-02WSRH

In conclusion, the ESD5B5.0ST5G is a vital component in protecting electronic systems from transient voltage events, offering fast response, low clamping voltage, and high surge current capability. Its compact package and wide operating temperature range make it suitable for a diverse range of applications, although careful consideration of its limitations is necessary for optimal performance.

[Word count: 498]

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням ESD5B5.0ST5G у технічних рішеннях

  1. What is ESD5B5.0ST5G?

    • ESD5B5.0ST5G is a type of ESD (Electrostatic Discharge) protection diode used to safeguard electronic components from electrostatic discharge events.

  2. How does ESD5B5.0ST5G protect electronic components?

    • ESD5B5.0ST5G provides a low-impedance path for transient currents caused by electrostatic discharge, diverting the energy away from sensitive components and preventing damage.

  3. Where is ESD5B5.0ST5G commonly used in technical solutions?

    • ESD5B5.0ST5G is commonly used in various electronic devices such as smartphones, tablets, laptops, and other consumer electronics to protect against electrostatic discharge.

  4. What are the key specifications of ESD5B5.0ST5G?

    • The key specifications include its breakdown voltage, maximum clamping voltage, peak pulse current, and operating temperature range.

  5. How should ESD5B5.0ST5G be integrated into a technical solution?

    • ESD5B5.0ST5G should be placed in parallel with the protected circuitry, ensuring that it can quickly shunt any transient currents to ground during an ESD event.

  6. What are the potential risks if ESD5B5.0ST5G is not included in a technical solution?

    • Without ESD protection, electronic components are vulnerable to damage from electrostatic discharge, leading to reduced reliability and potential failure of the device.

  7. Can ESD5B5.0ST5G be used in high-speed data interfaces?

    • Yes, ESD5B5.0ST5G is suitable for high-speed data interfaces as it offers low capacitance and fast response times, minimizing signal degradation.

  8. Are there any specific layout considerations when using ESD5B5.0ST5G in a PCB design?

    • It's important to minimize trace lengths and provide a direct path to ground for the ESD protection diode to ensure effective transient current diversion.

  9. What are the industry standards or certifications relevant to ESD5B5.0ST5G?

    • ESD5B5.0ST5G may comply with industry standards such as IEC 61000-4-2 for electrostatic discharge immunity, and it may also be RoHS compliant.

  10. Can ESD5B5.0ST5G be used in automotive applications?

    • Yes, ESD5B5.0ST5G can be utilized in automotive electronics to protect sensitive components from electrostatic discharge, contributing to the overall reliability of the vehicle's electronic systems.