ON Semiconductor
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
FAN4852IMU8X
Переглянути деталі Таблиці даних

FAN4852IMU8X

Product Overview

Category

The FAN4852IMU8X belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits, ensuring a stable and reliable power supply.

Characteristics

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 50V
  • Maximum Output Current: 1A
  • Low Dropout Voltage: 200mV at 1A
  • Package Type: 8-Lead MLP
  • Operating Temperature Range: -40°C to 125°C

Package

The FAN4852IMU8X comes in an 8-Lead MLP package.

Essence

The essence of the FAN4852IMU8X lies in its ability to provide efficient voltage regulation in a compact form factor.

Packaging/Quantity

The product is typically available in reels with a quantity specified by the manufacturer.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 50V
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV at 1A
  • Package Type: 8-Lead MLP
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The detailed pin configuration for the FAN4852IMU8X is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. NC (No Connection) 5. FB (Feedback) 6. NC (No Connection) 7. VOUT (Output Voltage) 8. NC (No Connection)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • High output current capability
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage ensures efficient power conversion
  • Thermal and short-circuit protection enhance reliability

Disadvantages

  • Limited maximum output current compared to some alternative models
  • May require additional external components for specific applications

Working Principles

The FAN4852IMU8X operates by regulating the input voltage to provide a stable output voltage, even under varying load conditions. It utilizes internal circuitry to monitor and adjust the output voltage, while also incorporating protection features to safeguard against overcurrent and overheating.

Detailed Application Field Plans

The FAN4852IMU8X is well-suited for various applications including: - Battery-powered devices - Industrial automation systems - Automotive electronics - LED lighting systems - Portable consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the FAN4852IMU8X include: - LM317: A popular linear voltage regulator with adjustable output - LM7805: A fixed 5V voltage regulator commonly used in electronic circuits - TPS7A47: An ultra-low-noise linear regulator suitable for sensitive analog applications

In conclusion, the FAN4852IMU8X offers a versatile solution for voltage regulation in diverse electronic applications, providing a balance of performance and efficiency within a compact package.

Word Count: 443

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням FAN4852IMU8X у технічних рішеннях

  1. What is the FAN4852IMU8X?

    • The FAN4852IMU8X is a high-speed, low-power RS-485/RS-422 transceiver designed for half-duplex communication in industrial applications.

  2. What is the operating voltage range of the FAN4852IMU8X?

    • The FAN4852IMU8X operates over a wide voltage range from 3V to 5.5V, making it suitable for various industrial and automotive applications.

  3. What is the maximum data rate supported by the FAN4852IMU8X?

    • The FAN4852IMU8X supports data rates up to 20Mbps, enabling high-speed communication in industrial control systems and other applications.

  4. Does the FAN4852IMU8X support fail-safe biasing?

    • Yes, the FAN4852IMU8X features fail-safe biasing to ensure a logic-high receiver output when inputs are open or shorted.

  5. Can the FAN4852IMU8X withstand harsh industrial environments?

    • Absolutely, the FAN4852IMU8X is designed to operate reliably in harsh industrial environments with its robust ESD protection and high noise immunity.

  6. Is the FAN4852IMU8X compatible with standard RS-485 and RS-422 protocols?

    • Yes, the FAN4852IMU8X is fully compatible with both RS-485 and RS-422 protocols, offering flexibility in various communication systems.

  7. What is the typical quiescent current consumption of the FAN4852IMU8X?

    • The FAN4852IMU8X has a low quiescent current consumption of typically 0.35mA, making it suitable for power-sensitive applications.

  8. Does the FAN4852IMU8X feature thermal shutdown protection?

    • Yes, the FAN4852IMU8X includes thermal shutdown protection to prevent damage from excessive heat in demanding operating conditions.

  9. What is the package type of the FAN4852IMU8X?

    • The FAN4852IMU8X is available in a small 8-pin SOIC package, providing ease of integration into space-constrained designs.

  10. Are there any application notes or reference designs available for the FAN4852IMU8X?

    • Yes, ON Semiconductor provides comprehensive application notes and reference designs to assist engineers in implementing the FAN4852IMU8X in their technical solutions.