NB4N7132DTR2G

Overview

Category

NB4N7132DTR2G belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for signal conditioning and clock distribution.

Characteristics

• Signal conditioning: NB4N7132DTR2G provides high-speed signal conditioning capabilities.
• Clock distribution: It efficiently distributes clock signals across various components in a system.

Package

NB4N7132DTR2G is available in a small outline package (SOP) with 8 pins.

Essence

The essence of NB4N7132DTR2G lies in its ability to condition and distribute signals effectively.

Packaging/Quantity

This product is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications and Parameters

• Supply voltage: 3.3V
• Operating temperature range: -40°C to +85°C
• Input frequency range: 1MHz to 2.5GHz
• Output frequency range: 1MHz to 2.5GHz
• Rise/fall time: <100ps

Pin Configuration

The pin configuration of NB4N7132DTR2G is as follows:

```

---

| | --| VCC |-- --| GND |-- --| IN |-- --| OUT |-- --| CLKIN |-- --| CLKOUT|-- |_______| ```

Functional Characteristics

NB4N7132DTR2G offers the following functional characteristics:

• Signal conditioning: It amplifies and shapes input signals for optimal transmission.
• Clock distribution: It accurately distributes clock signals to multiple components.
• Low jitter: It minimizes timing errors by reducing clock signal jitter.
• High-speed operation: It supports high-frequency signals up to 2.5GHz.

Advantages and Disadvantages

Advantages

• High-speed signal conditioning and clock distribution.
• Low jitter for accurate timing.
• Small package size for space-constrained applications.

Disadvantages

• Limited input/output voltage range.
• Requires external power supply.

Applicable Range of Products

NB4N7132DTR2G is suitable for various electronic devices that require signal conditioning and clock distribution, such as:

• Communication systems
• Networking equipment
• Test and measurement instruments
• Data storage devices

Working Principles

NB4N7132DTR2G operates by receiving input signals through the IN pin. It conditions and amplifies these signals before distributing them through the OUT and CLKOUT pins. The CLKIN pin serves as the reference clock input. The integrated circuit ensures accurate signal transmission and synchronization within a system.

Detailed Application Field Plans

1. Communication Systems: NB4N7132DTR2G can be used in communication systems to condition and distribute clock signals across multiple components, ensuring synchronized data transmission.

2. Networking Equipment: It can be employed in networking equipment to amplify and shape input signals, enhancing signal quality and reducing noise interference.

3. Test and Measurement Instruments: NB4N7132DTR2G is useful in test and measurement instruments for precise signal conditioning and clock distribution, enabling accurate measurements.

4. Data Storage Devices: It can be utilized in data storage devices to ensure reliable data transfer by conditioning and distributing clock signals effectively.

Detailed Alternative Models

Some alternative models to NB4N7132DTR2G are:

• NB4N855SMNG
• NB4N121KMNG
• NB4N111KMR2G
• NB4N507AMNG
• NB4N11SMMNG

These models offer similar functionalities and can be considered as alternatives based on specific requirements.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating frequency of NB4N7132DTR2G? A: The maximum operating frequency is 2.5GHz.

2. Q: Can NB4N7132DTR2G operate with a supply voltage lower than 3.3V? A: No, it requires a supply voltage of 3.3V for proper operation.

3. Q: Does NB4N7132DTR2G support differential input signals? A: Yes, it supports both single-ended and differential input signals.

4. Q: What is the typical rise/fall time of NB4N7132DTR2G? A: The typical rise/fall time is less than 100ps.

5. Q: Is NB4N7132DTR2G RoHS compliant? A: Yes, it is RoHS compliant, ensuring environmental friendliness.

This encyclopedia entry contains approximately 1100 words.