Деталі продукту див. у специфікаціях.
PN4393_D26Z
Product Overview
Category
The PN4393_D26Z belongs to the category of field-effect transistors (FETs).
Use
It is commonly used as a switching device in electronic circuits.
Characteristics
- Low power consumption
- High input impedance
- Fast switching speed
Package
The PN4393_D26Z is typically available in a TO-92 package.
Essence
This FET is essential for controlling the flow of current in electronic circuits.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 30V
- Gate-Source Voltage (VGS): ±20V
- Drain Current (ID): 600mA
- Power Dissipation (PD): 350mW
- Operating Temperature: -55°C to 150°C
Detailed Pin Configuration
The PN4393_D26Z has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)
Functional Features
- Low input capacitance
- High gain
- Low noise
Advantages and Disadvantages
Advantages
- Low power consumption
- High input impedance
- Fast switching speed
Disadvantages
- Limited voltage and current handling capabilities
- Sensitivity to static electricity
Working Principles
The PN4393_D26Z operates based on the principle of field-effect modulation, where the flow of current between the source and drain terminals is controlled by the voltage applied to the gate terminal.
Detailed Application Field Plans
The PN4393_D26Z is widely used in various applications, including: - Audio amplifiers - Signal processing circuits - Switching circuits
Detailed and Complete Alternative Models
Some alternative models to PN4393_D26Z include: - 2N7000 - BS170 - IRF510
In conclusion, the PN4393_D26Z is a versatile field-effect transistor with low power consumption and high input impedance, making it suitable for a wide range of electronic applications.
[Word count: 298]
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням PN4393_D26Z у технічних рішеннях
Sure, here are 10 common questions and answers related to the application of PN4393_D26Z in technical solutions:
What is PN4393_D26Z?
- PN4393_D26Z is a small-signal N-channel JFET (junction field-effect transistor) designed for general-purpose amplifier applications.
What are the key features of PN4393_D26Z?
- The key features of PN4393_D26Z include low on-state resistance, high forward transfer admittance, and low input and output capacitance.
What are the typical applications of PN4393_D26Z?
- PN4393_D26Z is commonly used in audio amplifiers, instrumentation amplifiers, analog switches, and voltage-controlled resistors.
What is the maximum drain-source voltage for PN4393_D26Z?
- The maximum drain-source voltage for PN4393_D26Z is 40 volts.
What is the maximum continuous drain current for PN4393_D26Z?
- The maximum continuous drain current for PN4393_D26Z is 35 milliamps.
What is the typical input capacitance of PN4393_D26Z?
- The typical input capacitance of PN4393_D26Z is 15 picofarads.
Can PN4393_D26Z be used in high-frequency applications?
- Yes, PN4393_D26Z can be used in moderate to high-frequency applications due to its low input and output capacitance.
Is PN4393_D26Z suitable for battery-powered applications?
- Yes, PN4393_D26Z is suitable for battery-powered applications due to its low power consumption and high efficiency.
What are the recommended operating temperature ranges for PN4393_D26Z?
- The recommended operating temperature ranges for PN4393_D26Z are typically between -55°C to +150°C.
Where can I find detailed specifications and application notes for PN4393_D26Z?
- Detailed specifications and application notes for PN4393_D26Z can be found in the manufacturer's datasheet and technical documentation.
I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.