Power Integrations
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
LNK6664K
Переглянути деталі Таблиці даних

LNK6664K - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low standby power consumption - Wide input voltage range - Over-temperature protection - Over-voltage protection - Over-current protection

Package: TO-220

Essence: LNK6664K is a power management integrated circuit designed for efficient power conversion and management in various electronic devices.

Packaging/Quantity: The LNK6664K is typically packaged in TO-220 format and is available in reels or tubes containing multiple units.

Specifications

The LNK6664K has the following specifications:

  • Input Voltage Range: 85V AC to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 1A
  • Efficiency: Up to 85%
  • Standby Power Consumption: Less than 100mW
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The LNK6664K features a standard pin configuration with the following pins:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. DRAIN: High-voltage power MOSFET drain connection
  5. SOURCE: High-voltage power MOSFET source connection

Functional Features

The LNK6664K offers the following functional features:

  • Primary-side control eliminates the need for an optocoupler and secondary-side feedback components.
  • Auto-restart protection feature ensures continuous operation even in fault conditions.
  • Frequency jittering reduces EMI emissions.
  • Built-in over-temperature, over-voltage, and over-current protection enhance system reliability.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption and heat dissipation. - Wide input voltage range allows for universal compatibility. - Integrated protection features enhance system reliability. - Primary-side control simplifies circuit design and reduces component count.

Disadvantages: - Limited output current may not be suitable for high-power applications. - The TO-220 package may require additional cooling measures in certain scenarios.

Working Principles

The LNK6664K utilizes a primary-side control approach to regulate the output voltage. It operates by modulating the duty cycle of the internal power MOSFET based on the feedback received from the FB pin. This control method eliminates the need for an optocoupler and secondary-side feedback components, reducing cost and complexity.

Detailed Application Field Plans

The LNK6664K is commonly used in various applications, including but not limited to:

  1. Power supplies for consumer electronics
  2. LED lighting systems
  3. Industrial automation equipment
  4. Home appliances
  5. Battery chargers

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LNK6664K include:

  1. LNK6665K
  2. LNK6666K
  3. LNK6667K
  4. LNK6668K

These alternative models are compatible with the same pin configuration and provide comparable performance characteristics.

In conclusion, the LNK6664K is a power management IC designed for efficient power conversion and management in various electronic devices. Its primary-side control approach, integrated protection features, and wide input voltage range make it a versatile choice for many applications. However, its limited output current and TO-220 package may have some limitations in specific scenarios.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням LNK6664K у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of LNK6664K in technical solutions:

  1. Q: What is LNK6664K? A: LNK6664K is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK6664K? A: LNK6664K features include primary-side regulation, high efficiency, accurate constant current control, and comprehensive protection features.

  3. Q: What are the typical applications of LNK6664K? A: LNK6664K is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK6664K achieve primary-side regulation? A: LNK6664K uses a proprietary algorithm called EcoSmart™ to regulate the output voltage directly from the primary side, eliminating the need for an optocoupler or secondary feedback circuitry.

  5. Q: Can LNK6664K support dimming functionality? A: Yes, LNK6664K can support both analog and PWM dimming methods, making it suitable for various lighting applications.

  6. Q: What is the efficiency range of LNK6664K? A: LNK6664K offers high efficiency ranging from 80% to 90%, depending on the specific operating conditions.

  7. Q: Does LNK6664K have built-in protection features? A: Yes, LNK6664K incorporates multiple protection features such as over-temperature protection, output short-circuit protection, and open-loop protection.

  8. Q: Can LNK6664K operate in a wide input voltage range? A: Yes, LNK6664K has a wide input voltage range of 85VAC to 265VAC, making it suitable for global applications.

  9. Q: What is the typical output power range of LNK6664K? A: LNK6664K can handle output power ranging from a few watts up to 15 watts, depending on the specific application and thermal conditions.

  10. Q: Is LNK6664K compliant with safety standards? A: Yes, LNK6664K is designed to meet various international safety standards such as UL, CE, and ENEC, ensuring reliable and safe operation in different regions.

Please note that these answers are general and may vary based on specific product documentation and application requirements.