Power Integrations
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
TNY378PN
Переглянути деталі Таблиці даних

TNY378PN

Product Overview

Category

TNY378PN belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and control.

Characteristics

  • TNY378PN is a highly efficient and compact IC designed for low-power applications.
  • It offers excellent performance in terms of energy efficiency and thermal management.
  • The IC incorporates various protection features to ensure safe operation.
  • It is suitable for both AC-DC and DC-DC power supply applications.

Package

TNY378PN is available in a standard plastic package, which provides mechanical protection and facilitates easy integration into circuit boards.

Essence

The essence of TNY378PN lies in its ability to efficiently regulate and control power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

TNY378PN is typically sold in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Power: Up to 10W
  • Operating Temperature Range: -40°C to +150°C
  • Efficiency: >90%
  • Standby Power Consumption: <100mW
  • Output Voltage Options: 3.3V, 5V, 12V, etc.

Detailed Pin Configuration

TNY378PN features a standard pin configuration with the following pins:

  1. VDD: Power supply input
  2. BP/M: Burst mode control pin
  3. FB: Feedback pin for output voltage regulation
  4. GND: Ground reference
  5. D: Drain pin for primary side switch
  6. S: Source pin for primary side switch
  7. VSENSE: Current sense input pin
  8. VOUT: Output voltage pin

Functional Features

  • Integrated high-voltage power MOSFET
  • Auto-restart protection for fault conditions
  • Frequency jittering for reduced EMI emissions
  • Built-in line undervoltage lockout (UVLO) protection
  • Over-temperature protection
  • Cycle-by-cycle current limit

Advantages and Disadvantages

Advantages

  • High energy efficiency leads to reduced power consumption.
  • Compact size allows for space-saving designs.
  • Wide input voltage range enables versatile applications.
  • Comprehensive protection features enhance device reliability.

Disadvantages

  • Limited output power capability compared to higher-rated ICs.
  • May require additional external components for specific applications.
  • Not suitable for high-power or industrial applications.

Working Principles

TNY378PN operates on the principle of pulse width modulation (PWM) control. It regulates the output voltage by adjusting the duty cycle of the switching signal based on feedback from the FB pin. The integrated power MOSFET switches the input voltage to the output in a controlled manner, ensuring efficient power transfer.

Detailed Application Field Plans

TNY378PN finds extensive application in various low-power electronic devices, including but not limited to: - Power adapters - LED lighting systems - Home appliances - Battery chargers - Industrial controls

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TNY378PN are: - TNY379PN - TNY380PN - TNY381PN - TNY382PN

These models belong to the same product family and provide comparable performance characteristics, allowing designers to choose the most suitable option for their specific requirements.

Word count: 526 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням TNY378PN у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of TNY378PN in technical solutions:

  1. Q: What is TNY378PN? A: TNY378PN is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the typical applications of TNY378PN? A: TNY378PN is commonly used in various technical solutions such as power supplies, adapters, chargers, and LED lighting systems.

  3. Q: What is the input voltage range supported by TNY378PN? A: TNY378PN typically supports an input voltage range of 85VAC to 265VAC.

  4. Q: What is the output power range that TNY378PN can handle? A: TNY378PN can handle an output power range of up to 15 watts.

  5. Q: Does TNY378PN have built-in protection features? A: Yes, TNY378PN incorporates several protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  6. Q: Can TNY378PN operate in a wide temperature range? A: Yes, TNY378PN is designed to operate reliably in a wide temperature range, typically from -40°C to 150°C.

  7. Q: Is TNY378PN compatible with both AC and DC inputs? A: No, TNY378PN is specifically designed for AC input applications and may require additional components for DC input compatibility.

  8. Q: What is the efficiency of TNY378PN? A: TNY378PN offers high efficiency, typically above 80%, which helps reduce power consumption and heat generation.

  9. Q: Can TNY378PN be used in low-power applications? A: Yes, TNY378PN is suitable for low-power applications as it provides excellent performance even at lower output power levels.

  10. Q: Are there any specific design considerations when using TNY378PN? A: Yes, it is important to follow the manufacturer's datasheet and application notes for proper circuit design, component selection, and layout guidelines to ensure optimal performance and reliability of TNY378PN-based solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of TNY378PN in different technical solutions.