Richtek USA Inc.
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
RT8293AHZSP
Переглянути деталі Таблиці даних

RT8293AHZSP

Product Overview

Category

RT8293AHZSP belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

RT8293AHZSP comes in a small surface-mount package, typically a 5-pin SOT-23.

Essence

The essence of RT8293AHZSP lies in its ability to provide a stable and regulated output voltage despite fluctuations in the input voltage.

Packaging/Quantity

RT8293AHZSP is usually packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV at 500mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin (active high)
  4. FB: Feedback pin for setting the output voltage
  5. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The RT8293AHZSP exhibits high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, it can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: It can accept a wide range of input voltages, making it versatile for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range to meet specific requirements.
  • Overcurrent Protection: It incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for flexibility in different applications.
  • Adjustable output voltage provides customization options.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited maximum output current of 1A may not be suitable for high-power applications.
  • Dropout voltage of 200mV at 500mA might affect performance in low voltage scenarios.

Working Principles

RT8293AHZSP operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By comparing the feedback voltage with a reference voltage, it adjusts the pass transistor's resistance to maintain a stable output voltage.

Detailed Application Field Plans

RT8293AHZSP finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to RT8293AHZSP are: - LM1117-ADJ - LT1763-3.3 - TPS7A4700 - MCP1702-3302E/TO

These models offer similar functionalities and characteristics, providing alternatives for different design requirements.

Word count: 408 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням RT8293AHZSP у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of RT8293AHZSP in technical solutions:

  1. Q: What is RT8293AHZSP? A: RT8293AHZSP is a voltage regulator IC (integrated circuit) commonly used in electronic devices to regulate and stabilize voltage levels.

  2. Q: What is the input voltage range of RT8293AHZSP? A: The input voltage range of RT8293AHZSP is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of RT8293AHZSP? A: The output voltage range of RT8293AHZSP can be adjusted from 0.6V to 3.3V using external resistors.

  4. Q: What is the maximum output current of RT8293AHZSP? A: The maximum output current of RT8293AHZSP is typically around 3A, but it can vary depending on the specific application and operating conditions.

  5. Q: Can RT8293AHZSP operate in a wide temperature range? A: Yes, RT8293AHZSP is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  6. Q: Does RT8293AHZSP require any external components for operation? A: Yes, RT8293AHZSP requires a few external components such as input/output capacitors and feedback resistors for stable operation.

  7. Q: Is RT8293AHZSP suitable for battery-powered applications? A: Yes, RT8293AHZSP is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.

  8. Q: Can RT8293AHZSP handle input voltage fluctuations? A: Yes, RT8293AHZSP has built-in protection features like overvoltage protection and thermal shutdown to handle input voltage fluctuations and protect the IC.

  9. Q: Can RT8293AHZSP be used in both step-up and step-down applications? A: No, RT8293AHZSP is a step-down (buck) regulator, meaning it can only reduce the input voltage to a lower output voltage.

  10. Q: What are some typical applications of RT8293AHZSP? A: RT8293AHZSP is commonly used in various electronic devices such as smartphones, tablets, portable media players, and other battery-powered devices that require stable voltage regulation.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of RT8293AHZSP.