SI5338C-B04853-GMR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Clock Generator and Multiplier
• Characteristics:
  • High-frequency performance
  • Low jitter
  • Programmable output frequencies
  • Flexible input/output options
• Package: BGA (Ball Grid Array)
• Essence: Clock generation and multiplication
• Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications and Parameters

• Input Voltage Range: 2.375V to 3.63V
• Output Frequency Range: 1kHz to 945MHz
• Number of Outputs: 4
• Supply Voltage: 1.8V or 2.5V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SI5338C-B04853-GMR has a total of 48 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage | | 2 | GND | Ground | | 3 | XAXB | Differential clock input | | 4 | XAXA | Differential clock input | | ... | ... | ... | | 47 | OUT3 | Clock output 3 | | 48 | OUT4 | Clock output 4 |

Functional Characteristics

• Clock Generation: The SI5338C-B04853-GMR generates high-quality clock signals with programmable frequencies.
• Clock Multiplication: It can multiply the input clock frequency to provide higher frequency outputs.
• Jitter Reduction: The IC minimizes jitter, ensuring accurate timing in various applications.
• Flexible Configuration: It offers multiple input and output options, allowing customization for specific requirements.

Advantages and Disadvantages

Advantages: - High-frequency performance enables support for demanding applications. - Low jitter ensures precise timing synchronization. - Programmable output frequencies offer flexibility. - Flexible input/output options cater to various system configurations.

Disadvantages: - Limited number of outputs (4 in this case). - Requires careful configuration to optimize performance.

Applicable Range of Products

The SI5338C-B04853-GMR is suitable for a wide range of applications that require clock generation and multiplication. It finds use in telecommunications, networking, data centers, industrial automation, and consumer electronics.

Working Principles

The IC utilizes advanced phase-locked loop (PLL) technology to generate and multiply clock signals. It takes an input clock and uses internal dividers and multipliers to produce multiple output clocks with programmable frequencies.

Detailed Application Field Plans

1. Telecommunications: The SI5338C-B04853-GMR can be used in base stations, routers, and switches to provide accurate clock signals for data transmission.
2. Networking: It is suitable for network switches, routers, and servers, ensuring synchronized timing across the network.
3. Data Centers: The IC helps maintain precise timing in data center equipment, improving overall system performance.
4. Industrial Automation: It finds application in industrial control systems, PLCs, and robotics, providing reliable clock signals for synchronization.
5. Consumer Electronics: The IC can be used in high-end audio/video equipment, gaming consoles, and smart TVs to ensure accurate timing for multimedia processing.

Detailed Alternative Models

1. SI5338A-B04853-GMR: Similar to SI5338C-B04853-GMR but with different specifications.
2. SI5339C-B04853-GMR: A higher-performance version with additional features.
3. SI5341C-B04853-GMR: Offers more output channels and advanced clock management capabilities.

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of SI5338C-B04853-GMR? A: The maximum output frequency is 945MHz.

2. Q: Can I use a 3.3V power supply with this IC? A: No, the recommended supply voltage is 1.8V or 2.5V.

3. Q: How many clock outputs does it provide? A: It provides four clock outputs.

4. Q: Is the input clock signal compatible with LVDS? A: Yes, the IC supports LVDS differential inputs.

5. Q: What is the operating temperature range of SI5338C-B04853-GMR? A: It can operate in temperatures ranging from -40°C to +85°C.

This encyclopedia entry provides an overview of the SI5338C-B04853-GMR, including its basic information, specifications, pin configuration, functional characteristics, advantages, disadvantages, applicable range, working principles, application field plans, alternative models, and common technical questions and answers.