SSI Technologies Inc
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
P51-75-A-P-P-4.5OVP-000-000
Переглянути деталі Таблиці даних

P51-75-A-P-P-4.5OVP-000-000

Product Category: Electronic Component

Use: The P51-75-A-P-P-4.5OVP-000-000 is a voltage regulator module designed to provide stable and regulated power supply in electronic circuits.

Characteristics: This module is characterized by its compact size, high efficiency, and precise voltage regulation. It is designed for use in various electronic devices and systems.

Package: The P51-75-A-P-P-4.5OVP-000-000 comes in a small, sealed package suitable for surface mounting on printed circuit boards. The package contains the essential components required for voltage regulation.

Essence: The essence of this product lies in its ability to maintain a constant output voltage despite fluctuations in input voltage or load variations.

Packaging/Quantity: Each package contains one P51-75-A-P-P-4.5OVP-000-000 module.

Specifications:

  • Input Voltage Range: 4.5V to 75V
  • Output Voltage: 5V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to 85°C
  • Efficiency: 90%
  • Protection: Overvoltage Protection (OVP)

Detailed Pin Configuration:

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. NC (No Connection)

Functional Features:

  • Precise Voltage Regulation
  • Overvoltage Protection
  • Compact Size
  • High Efficiency

Advantages:

  • Stable and Regulated Output Voltage
  • Suitable for Wide Input Voltage Range
  • Compact Design
  • Efficient Power Conversion

Disadvantages:

  • Limited to Low to Medium Power Applications
  • Not Suitable for High Voltage Applications

Working Principles:

The P51-75-A-P-P-4.5OVP-000-000 utilizes a switching regulator topology to efficiently convert the input voltage to a stable 5V output. It employs feedback control to adjust the duty cycle of the switching elements, ensuring precise regulation.

Detailed Application Field Plans:

This module is ideal for use in various applications such as industrial control systems, automotive electronics, battery-powered devices, and telecommunications equipment where stable and regulated power supply is essential.

Detailed and Complete Alternative Models:

  • P51-50-A-P-P-4.5OVP-000-000
  • P51-100-A-P-P-4.5OVP-000-000
  • P51-75-B-P-P-4.5OVP-000-000

Word Count: 380

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням P51-75-A-P-P-4.5OVP-000-000 у технічних рішеннях

  1. What is the application of P51-75-A-P-P-4.5OVP-000-000?

    • P51-75-A-P-P-4.5OVP-000-000 is a pressure sensor commonly used in industrial and automotive applications to measure and monitor pressure levels.

  2. How does P51-75-A-P-P-4.5OVP-000-000 work?

    • This sensor operates by converting the mechanical pressure applied to it into an electrical output signal, which can be used for various control and monitoring purposes.

  3. What are the typical technical specifications of P51-75-A-P-P-4.5OVP-000-000?

    • The sensor typically has a pressure range of 0-75 psi, a 4-20 mA output signal, and an overvoltage protection rating of 4.5V.

  4. In what kind of technical solutions can P51-75-A-P-P-4.5OVP-000-000 be integrated?

    • It can be integrated into hydraulic systems, pneumatic systems, HVAC systems, and other industrial machinery where pressure monitoring and control are essential.

  5. What are the key features of P51-75-A-P-P-4.5OVP-000-000 that make it suitable for technical solutions?

    • Its high accuracy, reliability, and robust construction make it suitable for demanding industrial environments.

  6. How is P51-75-A-P-P-4.5OVP-000-000 calibrated and installed in technical solutions?

    • Calibration and installation procedures may vary, but typically involve following the manufacturer's guidelines and using appropriate tools and equipment.

  7. What are the potential challenges or limitations when using P51-75-A-P-P-4.5OVP-000-000 in technical solutions?

    • Some challenges may include compatibility with specific systems, environmental factors, and potential electrical interference.

  8. Are there any special maintenance requirements for P51-75-A-P-P-4.5OVP-000-000 in technical solutions?

    • Regular calibration checks, inspection for damage or wear, and adherence to recommended service intervals are important for maintaining optimal performance.

  9. Can P51-75-A-P-P-4.5OVP-000-000 be used in hazardous environments?

    • Depending on its certification and compliance with industry standards, it may be suitable for use in certain hazardous environments.

  10. Where can I find technical support or documentation for P51-75-A-P-P-4.5OVP-000-000?

    • Technical support and documentation can typically be obtained from the manufacturer, including datasheets, user manuals, and application notes.