STMicroelectronics
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
TDA75610LVPDTR
Переглянути деталі Таблиці даних

TDA75610LVPDTR

Product Overview

Category

TDA75610LVPDTR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in audio amplifier applications.

Characteristics

  • High output power capability
  • Low distortion
  • Low output noise
  • Standby function
  • Mute function
  • Short-circuit protection
  • Thermal overload protection

Package

TDA75610LVPDTR is available in a PowerSSO-36 package.

Essence

The essence of TDA75610LVPDTR lies in its ability to provide high-quality audio amplification with low distortion and noise, while offering various protection features.

Packaging/Quantity

This product is typically packaged in reels and comes in quantities suitable for mass production.

Specifications

  • Supply voltage range: 8V to 18V
  • Output power: Up to 50W per channel
  • Total harmonic distortion: <0.05%
  • Signal-to-noise ratio: >90dB
  • Operating temperature range: -40°C to +105°C

Detailed Pin Configuration

  1. OUT1: Output Channel 1
  2. OUT2: Output Channel 2
  3. OUT3: Output Channel 3
  4. OUT4: Output Channel 4
  5. GND: Ground
  6. VCC: Supply Voltage
  7. IN1: Input Channel 1
  8. IN2: Input Channel 2
  9. IN3: Input Channel 3
  10. IN4: Input Channel 4
  11. MUTE: Mute Control
  12. STBY: Standby Control
  13. DIAG: Diagnostic Output
  14. FAULT: Fault Detection
  15. VREF: Reference Voltage
  16. BOOT: Bootstrap Capacitor
  17. BYP: Bypass Capacitor
  18. VCC: Supply Voltage
  19. OUT4: Output Channel 4
  20. OUT3: Output Channel 3
  21. OUT2: Output Channel 2
  22. OUT1: Output Channel 1
  23. GND: Ground
  24. IN4: Input Channel 4
  25. IN3: Input Channel 3
  26. IN2: Input Channel 2
  27. IN1: Input Channel 1
  28. MUTE: Mute Control
  29. STBY: Standby Control
  30. DIAG: Diagnostic Output
  31. FAULT: Fault Detection
  32. VREF: Reference Voltage
  33. BOOT: Bootstrap Capacitor
  34. BYP: Bypass Capacitor
  35. VCC: Supply Voltage
  36. GND: Ground

Functional Features

  • High output power for driving speakers
  • Low distortion and noise for high-quality audio reproduction
  • Standby function for power-saving operation
  • Mute function for temporary audio silence
  • Short-circuit protection to prevent damage
  • Thermal overload protection to avoid overheating

Advantages and Disadvantages

Advantages

  • High output power capability
  • Low distortion and noise levels
  • Comprehensive protection features
  • Suitable for various audio amplifier applications

Disadvantages

  • Limited operating temperature range (-40°C to +105°C)
  • Requires external components for proper functionality

Working Principles

TDA75610LVPDTR operates as an audio amplifier by amplifying the input audio signals received from the input channels (IN1 to IN4) and driving the corresponding output channels (OUT1 to OUT4). It utilizes internal circuitry to ensure low distortion, low noise, and protection against short circuits and thermal overload.

Detailed Application Field Plans

TDA75610LVPDTR finds application in various audio systems, including: - Car audio systems - Home theater systems - Professional audio equipment - Portable audio devices

Detailed and Complete Alternative Models

  1. TDA7560: Similar audio amplifier IC with lower output power capability.
  2. TDA7850: Audio amplifier IC with higher output power capability.
  3. TDA7498: Class-D audio amplifier IC suitable for high-efficiency applications.

These alternative models offer different specifications and features to cater to diverse requirements in audio amplification.

Word count: 536 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням TDA75610LVPDTR у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of TDA75610LVPDTR in technical solutions:

  1. Q: What is TDA75610LVPDTR? A: TDA75610LVPDTR is a power amplifier integrated circuit (IC) designed for automotive audio applications.

  2. Q: What is the maximum output power of TDA75610LVPDTR? A: The maximum output power of TDA75610LVPDTR is 4 x 50 Watts into a 4-ohm load.

  3. Q: Can TDA75610LVPDTR be used in other applications apart from automotive audio? A: While it is primarily designed for automotive audio, TDA75610LVPDTR can also be used in other audio amplification applications where its specifications meet the requirements.

  4. Q: Does TDA75610LVPDTR support multiple input channels? A: Yes, TDA75610LVPDTR supports four independent input channels, allowing for stereo or multi-channel audio setups.

  5. Q: What is the operating voltage range of TDA75610LVPDTR? A: The operating voltage range of TDA75610LVPDTR is typically between 8V and 18V.

  6. Q: Is TDA75610LVPDTR compatible with both digital and analog audio sources? A: Yes, TDA75610LVPDTR is compatible with both digital and analog audio sources, making it versatile for various audio systems.

  7. Q: Does TDA75610LVPDTR have built-in protection features? A: Yes, TDA75610LVPDTR includes built-in protection features such as thermal shutdown, overvoltage protection, and short-circuit protection.

  8. Q: Can TDA75610LVPDTR be used in bridged mode for higher power output? A: No, TDA75610LVPDTR does not support bridged mode operation. It is designed for independent channel amplification.

  9. Q: What is the typical efficiency of TDA75610LVPDTR? A: The typical efficiency of TDA75610LVPDTR is around 90%, making it energy-efficient for automotive audio systems.

  10. Q: Are there any recommended external components to use with TDA75610LVPDTR? A: Yes, TDA75610LVPDTR requires a few external components such as decoupling capacitors, input coupling capacitors, and output filters for optimal performance.

Please note that these answers are general and may vary depending on the specific application and requirements.