Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
BQ34Z653DBTR
Переглянути деталі Таблиці даних

BQ34Z653DBTR

Product Overview

Category

BQ34Z653DBTR belongs to the category of battery fuel gauge integrated circuits.

Use

This product is primarily used for accurately measuring and monitoring the state of charge (SOC) and state of health (SOH) of rechargeable batteries.

Characteristics

  • Accurate measurement of SOC and SOH
  • High precision voltage and current sensing
  • Integrated protection features
  • Low power consumption
  • Wide operating temperature range

Package

BQ34Z653DBTR is available in a small 15-ball, 0.4mm pitch, 2.5mm x 2.5mm wafer chip scale package (WCSP).

Essence

The essence of BQ34Z653DBTR lies in its ability to provide reliable and precise battery monitoring and management capabilities.

Packaging/Quantity

This product is typically packaged in reels containing 3000 units per reel.

Specifications

  • Operating Voltage: 2.7V to 4.8V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interface: I2C
  • Battery Capacity Measurement Range: 10mAh to 65Ah
  • Fuel Gauge Accuracy: ±1%
  • Cell Balancing: Yes
  • Overvoltage Protection: Yes
  • Undervoltage Protection: Yes

Detailed Pin Configuration

  1. VSS - Ground
  2. SDA - I2C Serial Data
  3. SCL - I2C Serial Clock
  4. ALERT - Interrupt Output
  5. BAT - Battery Voltage Sense
  6. TS - Temperature Sense
  7. SRP - System Reset Output
  8. PACK+ - Positive Terminal of Battery Pack
  9. PACK- - Negative Terminal of Battery Pack
  10. VDD - Power Supply Input

Functional Features

  • Accurate SOC and SOH measurement
  • Real-time voltage and current sensing
  • Temperature compensation for accurate readings
  • Integrated protection against overvoltage and undervoltage conditions
  • Cell balancing to optimize battery performance
  • System reset output for fault detection
  • Low power consumption for extended battery life

Advantages and Disadvantages

Advantages

  • High accuracy in measuring SOC and SOH
  • Integrated protection features ensure battery safety
  • Small package size allows for space-constrained applications
  • Wide operating temperature range enables usage in various environments
  • Low power consumption prolongs battery life

Disadvantages

  • Limited battery capacity measurement range (10mAh to 65Ah)
  • Requires I2C communication interface for data retrieval

Working Principles

BQ34Z653DBTR utilizes advanced algorithms and integrated circuitry to accurately measure the state of charge and state of health of batteries. It employs voltage and current sensing techniques along with temperature compensation to provide precise readings. The device also incorporates protection features such as overvoltage and undervoltage safeguards, ensuring safe battery operation.

Detailed Application Field Plans

BQ34Z653DBTR finds application in a wide range of fields, including: 1. Portable electronic devices 2. Electric vehicles 3. Energy storage systems 4. Medical equipment 5. Industrial automation

In portable electronic devices, this fuel gauge IC enables accurate battery monitoring, preventing unexpected shutdowns. In electric vehicles, it ensures optimal battery utilization and enhances overall vehicle performance. Energy storage systems benefit from its ability to accurately measure battery capacity and manage charging/discharging cycles. Medical equipment relies on BQ34Z653DBTR for reliable battery monitoring, ensuring uninterrupted operation. Lastly, industrial automation applications utilize this product for efficient battery management in critical systems.

Detailed and Complete Alternative Models

  1. BQ27441-G1: Similar to BQ34Z653DBTR, this fuel gauge IC offers accurate SOC and SOH measurement along with integrated protection features. It comes in a different package and has a slightly different pin configuration.
  2. MAX17055: This fuel gauge IC provides similar functionality to BQ34Z653DBTR and is available in a different package. It offers high accuracy and low power consumption for battery monitoring applications.
  3. LTC2943: Another alternative, LTC2943, offers precise battery monitoring capabilities and incorporates a wide range of protection features. It supports I2C communication and comes in a different package.

These alternative models can be considered based on specific application requirements and compatibility with existing systems.

Word count: 586 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням BQ34Z653DBTR у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of BQ34Z653DBTR in technical solutions:

  1. Q: What is the BQ34Z653DBTR? A: The BQ34Z653DBTR is a battery fuel gauge and protection device commonly used in various technical solutions.

  2. Q: What is the purpose of the BQ34Z653DBTR? A: The BQ34Z653DBTR is designed to accurately measure and monitor the state of charge, voltage, current, and temperature of a battery.

  3. Q: How does the BQ34Z653DBTR communicate with other devices? A: The BQ34Z653DBTR supports I2C communication protocol, allowing it to interface with microcontrollers or other devices.

  4. Q: Can the BQ34Z653DBTR be used with different types of batteries? A: Yes, the BQ34Z653DBTR is compatible with various battery chemistries such as lithium-ion, lithium iron phosphate, and more.

  5. Q: Does the BQ34Z653DBTR provide accurate battery capacity estimation? A: Yes, the BQ34Z653DBTR utilizes advanced algorithms to provide accurate capacity estimation, taking into account factors like aging and temperature.

  6. Q: Can the BQ34Z653DBTR protect the battery from overcharging or over-discharging? A: Yes, the BQ34Z653DBTR includes built-in protection features to prevent overcharging, over-discharging, and excessive temperature conditions.

  7. Q: Is the BQ34Z653DBTR suitable for portable electronic devices? A: Yes, the BQ34Z653DBTR is commonly used in applications like smartphones, tablets, laptops, and other portable electronic devices.

  8. Q: Can the BQ34Z653DBTR be used in automotive applications? A: Yes, the BQ34Z653DBTR is suitable for automotive applications, providing accurate battery monitoring and protection.

  9. Q: Does the BQ34Z653DBTR support battery authentication? A: Yes, the BQ34Z653DBTR includes features for battery authentication, ensuring compatibility and safety.

  10. Q: Are there any evaluation tools available for the BQ34Z653DBTR? A: Yes, Texas Instruments provides evaluation modules and software tools to simplify the development and testing of solutions using the BQ34Z653DBTR.

Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.