Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
CD74ACT573M96
Переглянути деталі Таблиці даних

CD74ACT573M96

Product Overview

Category

CD74ACT573M96 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for data storage and transfer.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

CD74ACT573M96 is available in a standard 20-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CD74ACT573M96 lies in its ability to store and transmit digital information efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2V to 6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±24mA
  • Input Voltage: 0V to VCC
  • Propagation Delay: 5.5ns (typical)

Detailed Pin Configuration

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. LE (Latch Enable)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Octal transparent D-type latch
  • Non-inverting outputs
  • High-speed operation
  • Wide operating voltage range
  • TTL-compatible inputs

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transfer.
  • Low power consumption helps conserve energy.
  • Wide operating voltage range ensures compatibility with various systems.
  • Compatibility with different logic families enhances versatility.

Disadvantages

  • Limited output current may restrict usage in certain applications.
  • Propagation delay of 5.5ns may not be suitable for ultra-high-speed operations.

Working Principles

CD74ACT573M96 operates as an octal transparent D-type latch. It stores digital data on its inputs and transfers it to the outputs when enabled. The latch is controlled by the latch enable (LE) signal, while the output enable (OE) signal determines whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

CD74ACT573M96 finds extensive application in various electronic devices, including: 1. Microcontrollers 2. Data storage systems 3. Communication equipment 4. Industrial automation 5. Consumer electronics

Detailed and Complete Alternative Models

  1. SN74ACT573: Similar octal transparent D-type latch from Texas Instruments.
  2. MC74ACT573: Equivalent octal latch from ON Semiconductor.
  3. 74HC573: Octal latch with similar functionality from NXP Semiconductors.

These alternative models offer comparable features and can be used as substitutes for CD74ACT573M96 in different applications.

Word count: 408 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням CD74ACT573M96 у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of CD74ACT573M96 in technical solutions:

  1. Q: What is CD74ACT573M96? A: CD74ACT573M96 is a octal transparent latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the purpose of CD74ACT573M96? A: CD74ACT573M96 is used to store and control the flow of data in digital circuits.

  3. Q: How many bits can CD74ACT573M96 store? A: CD74ACT573M96 can store 8 bits of data.

  4. Q: What is the maximum operating voltage for CD74ACT573M96? A: The maximum operating voltage for CD74ACT573M96 is typically 5.5V.

  5. Q: Can CD74ACT573M96 be used in both parallel and serial data transfer? A: Yes, CD74ACT573M96 can be used for both parallel and serial data transfer.

  6. Q: What is the output drive capability of CD74ACT573M96? A: CD74ACT573M96 has a high output drive capability, allowing it to drive multiple loads.

  7. Q: Does CD74ACT573M96 have any built-in protection features? A: Yes, CD74ACT573M96 has built-in ESD protection on all inputs and outputs.

  8. Q: Can CD74ACT573M96 operate at high speeds? A: Yes, CD74ACT573M96 is designed to operate at high-speed clock frequencies.

  9. Q: Is CD74ACT573M96 compatible with other logic families? A: Yes, CD74ACT573M96 is compatible with a wide range of logic families, including TTL and CMOS.

  10. Q: What are some common applications of CD74ACT573M96? A: CD74ACT573M96 is commonly used in microprocessors, memory systems, data storage, and general-purpose digital systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.