Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
INA199A1RSWT
Переглянути деталі Таблиці даних

INA199A1RSWT

Product Overview

Category

The INA199A1RSWT belongs to the category of integrated circuit (IC) amplifiers.

Use

It is primarily used for current sensing and monitoring applications.

Characteristics

  • High accuracy and precision in current measurement.
  • Low offset voltage and low quiescent current.
  • Wide input voltage range.
  • High common-mode rejection ratio (CMRR).
  • Small package size for space-constrained designs.

Package

The INA199A1RSWT is available in a small SOT-23 package.

Essence

The essence of the INA199A1RSWT lies in its ability to accurately measure current in various applications.

Packaging/Quantity

The INA199A1RSWT is typically packaged in reels, with 3000 units per reel.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Input Common-Mode Voltage Range: -0.3V to V+ + 0.3V
  • Quiescent Current: 60µA (typical)
  • Gain Bandwidth Product: 500kHz (typical)
  • Offset Voltage: 100µV (maximum)
  • Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The INA199A1RSWT has the following pin configuration:

  1. V+
  2. IN-
  3. IN+
  4. REF
  5. OUT
  6. GND

Functional Features

  • High accuracy current sensing.
  • Differential input voltage measurement.
  • Wide supply voltage range.
  • Rail-to-rail output swing.
  • Internal reference voltage generation.

Advantages and Disadvantages

Advantages

  • Accurate and precise current measurement.
  • Wide input voltage range allows for versatile applications.
  • Small package size enables space-saving designs.
  • Low offset voltage ensures minimal measurement errors.
  • High CMRR reduces common-mode noise interference.

Disadvantages

  • Limited gain bandwidth product may restrict high-frequency applications.
  • Requires an external reference voltage for optimal performance.

Working Principles

The INA199A1RSWT operates based on the principle of current shunt measurement. It utilizes a precision amplifier to measure the voltage drop across a shunt resistor, which is proportional to the current flowing through it. The amplified voltage output is then processed and used for current monitoring or control purposes.

Detailed Application Field Plans

The INA199A1RSWT finds extensive use in various application fields, including:

  1. Power management systems.
  2. Battery charging and monitoring.
  3. Motor control and protection.
  4. Current sensing in industrial equipment.
  5. Overcurrent detection in automotive systems.
  6. Energy monitoring and metering.

Detailed and Complete Alternative Models

  1. INA199A2RSWT: Similar specifications with dual-channel capability.
  2. INA199B1RSWT: Lower quiescent current and extended temperature range.
  3. INA199C1RSWT: Higher gain bandwidth product for high-frequency applications.

These alternative models provide options based on specific requirements and design constraints.

Word count: 365 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням INA199A1RSWT у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of INA199A1RSWT in technical solutions:

Q1: What is INA199A1RSWT? A1: INA199A1RSWT is a high-side current shunt monitor IC (integrated circuit) that can accurately measure current flowing through a shunt resistor.

Q2: What is the typical operating voltage range for INA199A1RSWT? A2: The typical operating voltage range for INA199A1RSWT is from 2.7V to 26V.

Q3: How accurate is INA199A1RSWT in measuring current? A3: INA199A1RSWT has a typical accuracy of ±0.5% when measuring current.

Q4: Can INA199A1RSWT handle high currents? A4: Yes, INA199A1RSWT can handle high currents up to 100A with an external shunt resistor.

Q5: What is the output voltage range of INA199A1RSWT? A5: The output voltage range of INA199A1RSWT is typically from 0V to Vcc - 0.1V.

Q6: Does INA199A1RSWT have built-in protection features? A6: Yes, INA199A1RSWT has built-in overcurrent and overtemperature protection features to ensure safe operation.

Q7: Can INA199A1RSWT be used in automotive applications? A7: Yes, INA199A1RSWT is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

Q8: What is the package type of INA199A1RSWT? A8: INA199A1RSWT is available in a small SOT-23 package.

Q9: Can INA199A1RSWT be used in low-power applications? A9: Yes, INA199A1RSWT has a low quiescent current of typically 60µA, making it suitable for low-power applications.

Q10: Are there any application notes or reference designs available for INA199A1RSWT? A10: Yes, Texas Instruments provides application notes and reference designs that can help with the implementation of INA199A1RSWT in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.