Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
SN74ALS245ADWRG4
Переглянути деталі Таблиці даних

SN74ALS245ADWRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Bus Transceiver
  • Characteristics: High-speed, non-inverting, 8-bit bidirectional transceiver
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Converts signals between two bidirectional bus systems
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • High-Level Input Voltage: 2.0V to VCC
  • Low-Level Input Voltage: GND to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.5V
  • Maximum Operating Frequency: 125 MHz
  • Propagation Delay Time: 6 ns
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74ALS245ADWRG4 has a total of 20 pins, which are assigned as follows:

  1. DIR (Direction Control)
  2. OE (Output Enable)
  3. A1 (Data Input/Output)
  4. B1 (Data Input/Output)
  5. A2 (Data Input/Output)
  6. B2 (Data Input/Output)
  7. A3 (Data Input/Output)
  8. B3 (Data Input/Output)
  9. A4 (Data Input/Output)
  10. B4 (Data Input/Output)
  11. A5 (Data Input/Output)
  12. B5 (Data Input/Output)
  13. A6 (Data Input/Output)
  14. B6 (Data Input/Output)
  15. A7 (Data Input/Output)
  16. B7 (Data Input/Output)
  17. A8 (Data Input/Output)
  18. B8 (Data Input/Output)
  19. GND (Ground)
  20. VCC (Supply Voltage)

Functional Features

  • Bidirectional Data Transfer: Allows data to be transmitted in both directions between two bus systems.
  • Non-Inverting Logic: Maintains the same logic level of the input signal at the output.
  • High-Speed Operation: Supports fast data transmission up to 125 MHz.
  • Direction Control (DIR): Determines the direction of data flow.
  • Output Enable (OE): Enables or disables the outputs.

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer. - Non-inverting logic ensures compatibility with various systems. - Bidirectional functionality simplifies bus communication.

Disadvantages: - Limited operating temperature range (-40°C to +85°C). - Requires external control signals for proper operation.

Working Principles

The SN74ALS245ADWRG4 is a bidirectional bus transceiver that converts signals between two bus systems. It operates based on the direction control (DIR) and output enable (OE) signals. When DIR is set to transmit mode, data from the A bus is transferred to the B bus. Conversely, when DIR is set to receive mode, data from the B bus is transferred to the A bus. The OE signal enables or disables the outputs, allowing for seamless integration into the system.

Detailed Application Field Plans

The SN74ALS245ADWRG4 is commonly used in various applications, including:

  1. Microprocessor Interfacing: Facilitates communication between microprocessors and peripheral devices.
  2. Data Communication Systems: Enables data transfer between different communication protocols.
  3. Industrial Automation: Connects sensors, actuators, and control systems in industrial environments.
  4. Automotive Electronics: Interfaces between different automotive subsystems, such as engine control units and dashboard displays.
  5. Networking Equipment: Facilitates data transmission between network devices, such as routers and switches.

Detailed and Complete Alternative Models

  1. SN74ALS244ADWRG4: Octal buffer/line driver with 3-state outputs.
  2. SN74ALS240ADWRG4: Octal inverting buffer/line driver with 3-state outputs.
  3. SN74ALS541ADWRG4: Octal buffer/line driver with 3-state outputs and non-inverting logic.

These alternative models provide similar functionality to the SN74ALS245ADWRG4 and can be used as substitutes depending on specific requirements.

Word count: 511 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням SN74ALS245ADWRG4 у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of SN74ALS245ADWRG4:

  1. Q: What is SN74ALS245ADWRG4? A: SN74ALS245ADWRG4 is a bidirectional octal bus transceiver with 3-state outputs, commonly used in digital systems.

  2. Q: What is the operating voltage range for SN74ALS245ADWRG4? A: The operating voltage range for SN74ALS245ADWRG4 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data transfer rate supported by SN74ALS245ADWRG4? A: SN74ALS245ADWRG4 supports a maximum data transfer rate of 24 MHz.

  4. Q: Can SN74ALS245ADWRG4 be used for level shifting between different voltage domains? A: Yes, SN74ALS245ADWRG4 can be used for level shifting between different voltage domains as long as the voltage levels are within its operating range.

  5. Q: How many bidirectional channels does SN74ALS245ADWRG4 have? A: SN74ALS245ADWRG4 has 8 bidirectional channels, allowing for parallel data transfer.

  6. Q: What is the output current drive capability of SN74ALS245ADWRG4? A: SN74ALS245ADWRG4 has a typical output current drive capability of ±24 mA.

  7. Q: Can SN74ALS245ADWRG4 be used in high-speed applications? A: Yes, SN74ALS245ADWRG4 can be used in high-speed applications due to its fast propagation delay and setup/hold times.

  8. Q: Is SN74ALS245ADWRG4 compatible with TTL logic levels? A: Yes, SN74ALS245ADWRG4 is compatible with both TTL and CMOS logic levels.

  9. Q: Can SN74ALS245ADWRG4 be used for bus isolation in multi-master systems? A: Yes, SN74ALS245ADWRG4 can be used for bus isolation in multi-master systems to prevent contention between multiple devices.

  10. Q: What is the package type of SN74ALS245ADWRG4? A: SN74ALS245ADWRG4 comes in a standard SOIC-20 package, which is widely used and easy to solder.

Please note that these answers are general and may vary depending on specific application requirements.