SN74HC4060DRG4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Binary Counter/Divider
• Characteristics:
  • High-speed operation
  • Wide operating voltage range
  • Low power consumption
  • Small package size
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: The SN74HC4060DRG4 is a 14-stage binary counter/divider with an integrated oscillator and ripple-carry output.
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 2V to 6V
• Operating Temperature Range: -40°C to +85°C
• Maximum Clock Frequency: 25 MHz
• Number of Stages: 14
• Output Type: Ripple-Carry

Detailed Pin Configuration

The SN74HC4060DRG4 has a total of 16 pins. Here is the detailed pin configuration:

1. VCC: Positive power supply (+2V to +6V)
2. GND: Ground (0V reference)
3. MR: Master Reset (active low)
4. CP: Clock Input
5. Q12-Q14: Ripple-Carry Outputs
6. Q11-Q4: Binary Counter Outputs
7. Q3-Q0: Binary Counter Outputs
8. Q5-Q10: Binary Counter Outputs
9. NC: No Connection
10. CD4093B: Oscillator Feedback Input
11. REXT: Oscillator External Resistor
12. CEXT: Oscillator External Capacitor
13. OSCOUT: Oscillator Output
14. OSCIN: Oscillator Input
15. NC: No Connection
16. VCC: Positive power supply (+2V to +6V)

Functional Features

• Integrated oscillator with external resistor and capacitor for frequency control.
• Binary counter/divider with 14 stages.
• Ripple-carry outputs for cascading multiple counters.
• Master Reset (MR) input for synchronous reset of the counter.
• Clock input (CP) for clocking the counter.

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient counting and dividing. - Wide operating voltage range provides flexibility in different applications. - Low power consumption helps conserve energy. - Small package size saves board space.

Disadvantages: - Limited number of stages may not be suitable for complex counting applications. - Lack of built-in preset capability limits certain functionalities.

Working Principles

The SN74HC4060DRG4 operates as a binary counter/divider. The integrated oscillator generates clock pulses that drive the counter. Each clock pulse increments the counter by one, and the output stages represent the binary count. The ripple-carry outputs allow for cascading multiple counters to achieve higher counting ranges. The master reset input resets the counter synchronously when activated.

Detailed Application Field Plans

The SN74HC4060DRG4 is commonly used in various applications, including:

1. Frequency Division: The counter can be used to divide an input frequency by a specific factor, enabling frequency scaling in electronic circuits.
2. Time Delay Generation: By utilizing the oscillator and counter, precise time delays can be generated for controlling events in timing-sensitive systems.
3. Digital Clocks: The counter can be employed to build digital clocks or timers, where each output stage represents a specific time unit (seconds, minutes, hours, etc.).
4. Frequency Synthesis: Cascading multiple counters with different division factors allows for generating complex frequencies for signal synthesis applications.

Detailed and Complete Alternative Models

1. CD4060BE: Similar 14-stage binary counter/divider IC from Texas Instruments.
2. MC14060B: 14-stage ripple-carry binary counter/divider IC from ON Semiconductor.
3. HEF4060BP: 14-stage ripple-carry binary counter/divider IC from NXP Semiconductors.

These alternative models offer similar functionalities and can be used as substitutes for the SN74HC4060DRG4 in various applications.

Word count: 518 words