Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
SN74LS163ANG4
Переглянути деталі Таблиці даних

SN74LS163ANG4

Product Overview

Category

SN74LS163ANG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronics and computer systems for various applications such as counters, registers, and data storage.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL logic levels
  • Reliable performance

Package

SN74LS163ANG4 is available in a 16-pin DIP (Dual In-line Package) format.

Essence

The essence of SN74LS163ANG4 lies in its ability to perform accurate counting and data storage functions in electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 25 MHz
  • Number of Counting Stages: 4
  • Output Current: ±8 mA

Detailed Pin Configuration

  1. Clock Enable (CE)
  2. Parallel Load (PL)
  3. Clock (CLK)
  4. Master Reset (MR)
  5. Data Inputs (D0-D3)
  6. Carry Output (CO)
  7. Count Enable (CEP)
  8. Ripple Clock Output (RCO)
  9. Q0 Output
  10. Q1 Output
  11. Q2 Output
  12. Q3 Output
  13. GND (Ground)
  14. Q3' Output
  15. Q2' Output
  16. VCC (Supply Voltage)

Functional Features

  • Synchronous operation with parallel load capability
  • Up/down counting mode selection
  • Asynchronous master reset
  • Carry output for cascading multiple counters
  • Ripple clock output for cascading counters in a ripple fashion

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient counting and data storage.
  • Low power consumption helps in reducing overall system energy requirements.
  • Wide operating voltage range ensures compatibility with various systems.
  • TTL logic level compatibility simplifies integration with existing circuits.
  • Reliable performance ensures accurate counting and data storage.

Disadvantages

  • Limited number of counting stages (4 in this case) may restrict certain applications requiring higher counts.
  • Lack of built-in error detection or correction mechanisms may require additional circuitry for fault tolerance.

Working Principles

SN74LS163ANG4 operates based on synchronous binary counting principles. The clock signal controls the counting process, while the parallel load input allows for loading initial values. The outputs represent the current count value, and the carry output facilitates cascading multiple counters for extended counting capabilities.

Detailed Application Field Plans

SN74LS163ANG4 finds applications in various fields, including: 1. Digital frequency dividers 2. Industrial automation systems 3. Communication equipment 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74LS163ANG4 include: 1. CD40163BE 2. MC74HC163AN 3. 74F163APC 4. DM74LS163AN 5. SN54LS163AJ

These alternatives can be considered based on specific requirements and availability.

Word count: 486 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням SN74LS163ANG4 у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of SN74LS163ANG4:

  1. Q: What is SN74LS163ANG4? A: SN74LS163ANG4 is a synchronous 4-bit binary counter IC (integrated circuit) that can be used in various technical solutions.

  2. Q: What is the maximum clock frequency supported by SN74LS163ANG4? A: The maximum clock frequency supported by SN74LS163ANG4 is typically around 25 MHz.

  3. Q: How many outputs does SN74LS163ANG4 have? A: SN74LS163ANG4 has four outputs, representing the four bits of the binary count.

  4. Q: Can SN74LS163ANG4 be cascaded to create larger counters? A: Yes, SN74LS163ANG4 can be cascaded with other counters to create larger counters with more bits.

  5. Q: What is the power supply voltage range for SN74LS163ANG4? A: The power supply voltage range for SN74LS163ANG4 is typically between 4.75V and 5.25V.

  6. Q: Does SN74LS163ANG4 have any asynchronous inputs? A: No, SN74LS163ANG4 does not have any asynchronous inputs. It operates purely based on the clock signal.

  7. Q: What is the maximum propagation delay of SN74LS163ANG4? A: The maximum propagation delay of SN74LS163ANG4 is typically around 30 ns.

  8. Q: Can SN74LS163ANG4 be used in both synchronous and asynchronous applications? A: SN74LS163ANG4 is primarily designed for synchronous applications, but it can also be used in certain asynchronous scenarios.

  9. Q: What is the purpose of the clear input in SN74LS163ANG4? A: The clear input (CLR) in SN74LS163ANG4 is used to reset the counter to its initial state.

  10. Q: Can SN74LS163ANG4 be used in high-speed applications? A: While SN74LS163ANG4 is not specifically designed for high-speed applications, it can still be used in moderate-speed scenarios effectively.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.