Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
TPS22945DCKR
Переглянути деталі Таблиці даних

TPS22945DCKR

Product Overview

Category

The TPS22945DCKR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for power distribution and control in electronic devices.

Characteristics

  • Low on-resistance
  • Fast switching speed
  • Overcurrent protection
  • Undervoltage lockout
  • Thermal shutdown protection

Package

The TPS22945DCKR is available in a small 5-pin SC-70 package.

Essence

This PMIC provides efficient power management and control, ensuring reliable operation of electronic devices.

Packaging/Quantity

The TPS22945DCKR is typically sold in reels containing 3000 units.

Specifications

  • Input voltage range: 1.8V to 5.5V
  • Output voltage range: 0V to VDD
  • On-resistance: 50mΩ (typical)
  • Quiescent current: 10µA (typical)
  • Operating temperature range: -40°C to 85°C

Detailed Pin Configuration

The TPS22945DCKR has the following pin configuration:

  1. EN (Enable): Controls the power switch.
  2. IN (Input): Connects to the input voltage source.
  3. GND (Ground): Common ground reference.
  4. OUT (Output): Connects to the load.
  5. PG (Power Good): Indicates the output voltage is within the specified range.

Functional Features

  • Power sequencing capability
  • Adjustable overcurrent protection threshold
  • Power good indication
  • Low quiescent current
  • Fast turn-on and turn-off times

Advantages and Disadvantages

Advantages

  • Efficient power distribution and control
  • Small form factor
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Power sequencing capability

Disadvantages

  • Limited output voltage range
  • Relatively high on-resistance compared to some alternatives

Working Principles

The TPS22945DCKR is a load switch that controls the power supply to a load. When the EN pin is high, the internal power switch turns on, allowing current to flow from the input to the output. The device incorporates various protection features such as overcurrent and thermal shutdown to ensure safe operation.

Detailed Application Field Plans

The TPS22945DCKR can be used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TPS22945DCKR include: - TPS22946DCKR - TPS22947DCKR - TPS22948DCKR - TPS22949DCKR

These models have slightly different specifications and may be suitable for specific application requirements.

In conclusion, the TPS22945DCKR is a power management integrated circuit that provides efficient power distribution and control. It offers various protection features and is commonly used in portable electronic devices, battery-powered systems, and IoT devices. While it has advantages such as a wide input voltage range and power sequencing capability, it also has limitations like a limited output voltage range. However, there are alternative models available to suit specific application needs.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням TPS22945DCKR у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of TPS22945DCKR in technical solutions:

  1. Q: What is TPS22945DCKR? A: TPS22945DCKR is a low-voltage, ultra-low RON load switch with an integrated power-good output.

  2. Q: What is the maximum input voltage supported by TPS22945DCKR? A: The maximum input voltage supported by TPS22945DCKR is 5.5V.

  3. Q: What is the typical on-resistance (RON) of TPS22945DCKR? A: The typical on-resistance of TPS22945DCKR is around 20 milliohms.

  4. Q: Can TPS22945DCKR handle high current loads? A: Yes, TPS22945DCKR can handle high current loads up to 2A.

  5. Q: Does TPS22945DCKR have overcurrent protection? A: Yes, TPS22945DCKR has built-in overcurrent protection to safeguard against excessive currents.

  6. Q: Is TPS22945DCKR suitable for battery-powered applications? A: Yes, TPS22945DCKR is designed for low-power applications and is well-suited for battery-powered devices.

  7. Q: Can TPS22945DCKR be used in automotive applications? A: Yes, TPS22945DCKR is qualified for automotive applications and can operate in harsh environments.

  8. Q: Does TPS22945DCKR have thermal shutdown protection? A: Yes, TPS22945DCKR incorporates thermal shutdown protection to prevent overheating.

  9. Q: Can TPS22945DCKR be used in power sequencing applications? A: Yes, TPS22945DCKR supports power sequencing and can be used to control the order of power supply turn-on.

  10. Q: What is the package type of TPS22945DCKR? A: TPS22945DCKR is available in a small SOT-23 package, which is suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.