Texas Instruments
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
UCC3973N
Переглянути деталі Таблиці даних

UCC3973N

Product Overview

Category

UCC3973N belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • UCC3973N is a high-performance voltage mode PWM controller.
  • It operates at a wide input voltage range, making it suitable for various power supply designs.
  • The IC offers excellent line and load regulation, ensuring stable output voltages.
  • It provides protection features such as overvoltage, undervoltage, and overcurrent protection.
  • UCC3973N has a low startup current, enabling efficient power management.

Package

The UCC3973N IC is available in a standard 8-pin dual in-line package (DIP).

Essence

The essence of UCC3973N lies in its ability to regulate and control power supply voltages efficiently.

Packaging/Quantity

UCC3973N is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 0.8V to 37V
  • Maximum Output Current: 1A
  • Switching Frequency: 100kHz to 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VCC: Power supply input pin.
  2. GND: Ground reference pin.
  3. COMP: Compensation pin for feedback loop stability.
  4. FB: Feedback pin for regulating the output voltage.
  5. CS: Current sense pin for overcurrent protection.
  6. RT/CT: Timing components connection pins.
  7. SYNC: Synchronization input pin for external clock synchronization.
  8. OUT: Output pin for regulated voltage.

Functional Features

  • Voltage mode PWM control for precise regulation.
  • Wide input voltage range allows versatile power supply designs.
  • Excellent line and load regulation for stable output voltages.
  • Overvoltage, undervoltage, and overcurrent protection for enhanced safety.
  • Low startup current minimizes power consumption.

Advantages

  • High-performance voltage regulation.
  • Wide input voltage range for flexibility.
  • Comprehensive protection features ensure system reliability.
  • Efficient power management with low startup current.

Disadvantages

  • Limited maximum output current of 1A.
  • Requires external timing components for operation.

Working Principles

UCC3973N operates based on the voltage mode PWM control technique. It compares the feedback voltage (FB) with a reference voltage to generate an error signal. This error signal is then processed by the internal control circuitry to adjust the duty cycle of the PWM signal. By modulating the duty cycle, the IC regulates the output voltage according to the desired setpoint. The compensation pin (COMP) is used to stabilize the feedback loop and improve the overall system response.

Detailed Application Field Plans

UCC3973N finds applications in various power management systems, including but not limited to: - DC-DC converters - Voltage regulators - Power supplies for industrial equipment - Automotive electronics - Telecommunications infrastructure

Detailed and Complete Alternative Models

  1. UCC3972N: Similar to UCC3973N, but with a lower maximum output current of 500mA.
  2. UCC3974N: Similar to UCC3973N, but with a higher maximum output current of 2A.
  3. UCC3975N: Similar to UCC3973N, but with additional features such as adjustable switching frequency.

These alternative models provide options with varying specifications to cater to different application requirements.

Word count: 446 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням UCC3973N у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of UCC3973N in technical solutions:

  1. Q: What is UCC3973N? A: UCC3973N is a voltage mode PWM controller IC used for controlling power supplies in various technical applications.

  2. Q: What are the key features of UCC3973N? A: Some key features of UCC3973N include adjustable frequency, soft-start capability, overcurrent protection, and undervoltage lockout.

  3. Q: How does UCC3973N help in power supply control? A: UCC3973N provides precise regulation of output voltage by adjusting the duty cycle of the PWM signal, ensuring stable power supply operation.

  4. Q: Can UCC3973N handle high input voltages? A: Yes, UCC3973N can handle input voltages up to 60V, making it suitable for applications with higher voltage requirements.

  5. Q: Does UCC3973N have any built-in protection features? A: Yes, UCC3973N has built-in overcurrent protection, which helps safeguard the power supply from excessive current draw.

  6. Q: Can UCC3973N be used in both step-up and step-down power supply designs? A: Yes, UCC3973N can be used in both step-up (boost) and step-down (buck) power supply designs, providing versatility in various applications.

  7. Q: Is UCC3973N compatible with different types of power MOSFETs? A: Yes, UCC3973N is compatible with a wide range of power MOSFETs, allowing flexibility in choosing the appropriate MOSFET for the application.

  8. Q: Does UCC3973N have any thermal protection mechanism? A: Yes, UCC3973N has built-in thermal shutdown protection, which prevents the IC from overheating and ensures safe operation.

  9. Q: Can UCC3973N operate in a wide temperature range? A: Yes, UCC3973N can operate within a temperature range of -40°C to 125°C, making it suitable for various environmental conditions.

  10. Q: Are there any application notes or reference designs available for UCC3973N? A: Yes, Texas Instruments provides application notes and reference designs that showcase the implementation of UCC3973N in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and relevant documentation for accurate information.