Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6108C27DGR-G
Переглянути деталі Таблиці даних

XC6108C27DGR-G

Product Overview

Category

XC6108C27DGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.7V
  • Maximum Output Current: 150mA
  • Low Quiescent Current: 1.0µA (typical)
  • Low Dropout Voltage: 100mV (typical)
  • High Ripple Rejection Ratio: 70dB (typical)
  • Built-in Overcurrent Protection
  • Small Package Size: SOT-23-5

Package

XC6108C27DGR-G is packaged in a small SOT-23-5 package.

Essence

The essence of XC6108C27DGR-G is its ability to provide stable and regulated voltage output in various electronic applications.

Packaging/Quantity

XC6108C27DGR-G is typically available in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.7V
  • Output Current: 150mA (maximum)
  • Quiescent Current: 1.0µA (typical)
  • Dropout Voltage: 100mV (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

XC6108C27DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Voltage regulation and stabilization
  • Overcurrent protection
  • Low quiescent current consumption
  • High ripple rejection ratio
  • Small package size for space-constrained applications

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Built-in overcurrent protection
  • Small package size

Disadvantages

  • Limited output current capacity (150mA maximum)

Working Principles

XC6108C27DGR-G works by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6108C27DGR-G is commonly used in various electronic devices and circuits that require a stable and regulated voltage supply. Some of its application fields include:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT devices
  4. Wearable devices
  5. Automotive electronics
  6. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6108C27DGR-G that provide similar functionality are:

  1. LM1117-2.7
  2. MCP1700-2.7
  3. TS2937-2.7
  4. LP2985-2.7
  5. AP2112-2.7

These alternative models can be considered based on specific requirements and availability.

Word count: 346 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6108C27DGR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6108C27DGR-G in technical solutions:

  1. Q: What is XC6108C27DGR-G? A: XC6108C27DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C27DGR-G? A: The operating voltage range of XC6108C27DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C27DGR-G help in technical solutions? A: XC6108C27DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset threshold voltage of XC6108C27DGR-G? A: The typical reset threshold voltage of XC6108C27DGR-G is 2.7V.

  5. Q: Can XC6108C27DGR-G be used in battery-powered applications? A: Yes, XC6108C27DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6108C27DGR-G have any built-in delay for the reset signal? A: Yes, XC6108C27DGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6108C27DGR-G suitable for automotive applications? A: Yes, XC6108C27DGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  8. Q: Can XC6108C27DGR-G be used in industrial control systems? A: Yes, XC6108C27DGR-G can be used in industrial control systems to ensure proper reset functionality and system stability.

  9. Q: Does XC6108C27DGR-G have any additional features or protection mechanisms? A: Yes, XC6108C27DGR-G has built-in overcurrent protection and thermal shutdown features to safeguard against abnormal operating conditions.

  10. Q: What package does XC6108C27DGR-G come in? A: XC6108C27DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6108C27DGR-G.