Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6108C28BGR-G
Переглянути деталі Таблиці даних

XC6108C28BGR-G

Product Overview

Category

XC6108C28BGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6108C28BGR-G is available in a small form factor package, suitable for surface mount technology (SMT) applications.

Essence

The essence of XC6108C28BGR-G lies in its ability to provide stable and regulated voltage output to ensure proper functioning of electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.8V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1.0μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C28BGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6108C28BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard connected components.
  • Low quiescent current: It consumes minimal current when not actively regulating voltage, resulting in energy efficiency.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption prolongs battery life in portable devices.
  • High efficiency reduces power dissipation and heat generation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6108C28BGR-G operates on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for variations in input voltage and load conditions.

Detailed Application Field Plans

XC6108C28BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT modules

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108C28BGR-G are: - XC6206P282MR-G - LM1117IMPX-2.8/NOPB - MCP1700T-2802E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 314 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6108C28BGR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6108C28BGR-G in technical solutions:

  1. Q: What is XC6108C28BGR-G? A: XC6108C28BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C28BGR-G? A: The operating voltage range of XC6108C28BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C28BGR-G work? A: XC6108C28BGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108C28BGR-G? A: XC6108C28BGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor.

  5. Q: Can XC6108C28BGR-G be used in battery-powered applications? A: Yes, XC6108C28BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.

  6. Q: What is the typical reset threshold voltage of XC6108C28BGR-G? A: The typical reset threshold voltage of XC6108C28BGR-G is 2.8V.

  7. Q: Does XC6108C28BGR-G have built-in hysteresis? A: Yes, XC6108C28BGR-G has built-in hysteresis, which helps prevent oscillation and ensures stable operation.

  8. Q: Can XC6108C28BGR-G be used in automotive applications? A: Yes, XC6108C28BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  9. Q: What is the package type of XC6108C28BGR-G? A: XC6108C28BGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Q: Are there any application notes or reference designs available for XC6108C28BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of XC6108C28BGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C28BGR-G.